FlexSeam Applicator DataSheet.pdf
FlexSe am ™ Adhesive Applic a tor (4-axis r obot version) 300C C PUR Dispensing Applica tor A precise and r eliable PUR Dispensing Applic at or for aut omatic f abric bonding pr oc esses F eatur es n High precision, eic…
FlexSeam™ Adhesive Applicator (4-axis robot version)
300CC PUR Dispensing Applicator
A precise and reliable PUR Dispensing Applicator for
automatic fabric bonding processes
Features
n High precision, eicient and various automatic
hot melt jetting/slot coating patterns on
exclusively designed 4-axis robot
n Provides so, exible, breathable and
versatile PUR bonding technologies on a wide
range of fabric material types
n High repeatability and dispensing accuracy
n Perfect edge control and thickness control for
slot coating
n Improved jetting performance by reduced
adhesive accumulation
n Abundant jetting nozzles and coating nozzles
are available
n Dual heating zones with precise temperature
controls
Nordson FlexSeam™ adhesive applicators (for 4-axis
robot) are designed to jet/ slot-coat hot melt PUR
adhesives with various patterns on a wide range of fabric
materials to support the PUR based fabric bonding
applications.
Nordson patented FlexSeam™ dispensing system
provide precise PUR jetting and slot coating patterns on
challenging fabric surfaces. A wide range of FlexSeam™
nozzles support customer’s requirements without
changing the major system parts on-site. A special 4-axis
robot is exclusively designed to work with the FlexSeam™
applicators, providing exible, precise and highly ecient
PUR dispensing performance.
Benets
n One applicator for both jetting/coating
applications (need to change modules),
reduce equipment investment
n Highly consistent, accurate dispensing
decreases the amount of rejected products
and improves productivity
n Modular design and robust, long-life
parts reduce equipment maintenance and
overall downtime.
n Pneumatic modules deliver consistent
dispensing and clean cuto for beads
FlexSeam™ Adhesive Applicator (4-axis robot version) 300CC PUR Dispensing Applicator
Specications
Operating Temperature 40° to 160/230° C (104° to 320/446° F)
(160° C/320° F only for Zone1)
Working Hydraulic Pressure 2 to 6 bar (29 to 87psi)
Maximum Hydraulic Pressure 6 bar (87 psi)
Maximum Applicator Running Speed
200 mm/s
Actuation Air Pressure 5 bar (72.5 psi) recommended
Temperature Control Stability ±1°C (2°F)
Temperature Control Sensor Ni120
Electrical Service 230 VAC 1 phase 50/60 Hz
System Input/output 3 digital outputs – Ready, Alarm/Fault, Low Level
4 digital inputs – Gun, Air, Level Detect, Leakage Detect
1 analog input – Gun O Time
Installation Dimensions (W x H x D) 1420 x 632 x 1791 mm (55.9 x 24.9 x 70.5 in.)
(800) 683-2314
nordsonadhesive.com
11475 Lakeeld Drive
Duluth, GA 30097-1511
Issued 02/22
© 2022 Nordson
Corporation All Rights
Reserved. Printed in U.S.A.
Nordson reserves the right
to make design changes
between printings.
For more
information,
speak with
your Nordson
representative
or contact
your Nordson
regional oice.
United States
Duluth, Georgia
(800) 683-2314 Phone
(866) 667-3329 Fax
Canada
Markham, Ontario
(800) 463-3200 Phone
(905) 475-8821 Fax
Europe
Erkrath, Germany
(49) 211-9205-0 Phone
(49) 211-254658 Fax
Japan
Tokyo, Japan
(81) 3-5762-2700 Phone
(81) 3-5762-2701 Fax
Asia/Australia/
Latin America
Amherst, Ohio
(440) 985-4797 Phone
(440) 985-1096 Fax
Find us on: