AS200SS.pdf

The Aquastorm 200 Stainless Steel cleaning system with dual w ash, dual chemical isolation and T orrid Zone dr yer provides complete cleaning per formance with fast throughput capability and optimal process flexibility .…

100%1 / 2
The Aquastorm 200
Stainless Steel cleaning
system with dual wash,
dual chemical isolation
and Torrid Zone dryer
provides complete
cleaning performance
with fast throughput
capability and optimal
process flexibility.
Electronic Assembly Equipment
Advantages of Dual Chemical Isolation
As more applications require chemistry to meet cleaning requirements, the Aquastorm 200SS offers dual chemical isolation – an
isolation section following each wash module. The benefit of chemical isolation is to reduce drag-out and take advantage of the
dual wash system for dual chemistry capability. The Aquastorm’s dual chemical isolation modules provides optimal separation
between both wash and rinse sections.
Dual Wash Cleaning
Electrovert’s Aquastorm 200SS cleaning technologies deliver dynamic energy that penetrates
under components. The Aquastorm 200SS standard configuration is equipped with dual wash
modules. This helps to significantly extend the dwell time in a heated wash environment, increases
throughput capabilities, and offers dual chemistry process flexibility.
Durable Stainless Steel Design
All wetted materials used within the process area of the Aquastorm 200SS are stainless steel. The durable
stainless steel design allows operating temperatures in the wet sections of up to 180°F. Removable front
and rear stainless steel panels and hinged, tempered glass windows offer complete user accessibility and
operational visibility. The Aquastorm is equipped with orbitally welded, stainless steel plumbing to eliminate
pressure drops and leaks. All sections can be replaced or upgraded in minutes to maximize uptime and
process flexibility.
In-line Aqueous Cleaning System
Aquastorm
®
200SS
Exceptional Performance and Process Flexibility
As PCB designs move towards highly dense, increased complexity, and miniaturization – manufacturers are looking for solutions
to increase product throughput and reliability. Electrovert developed the Aquastorm 200SS for manufacturers requiring a
solution for immediate and long term in-line cleaning requirements. The Aquastorm 200SS cleaning system with dual wash, dual
chemical isolation, and Torrid Zone drying is the total performance package providing fast throughput capability and optimal
process flexibility.
www.itweae.com
© 2018 ITW all rights reserved. Aquastorm 200SS 07-18
ITW EAE is a division of Illinois Tool Works, Inc. It is a consolidation of all of its Electronic Assembly
Equipment and Thermal Processing Technology. The group includes world-class products from MPM,
Camalot, Electrovert, Vitronics Soltec and Despatch.
Cleaning & Soldering Solutions
Aquastorm 200SS
Advanced User Interface
The Aquastorm 200SS is configured with a Windows®-based operating system that
features process monitoring, datalogging and product traceability via the system
software. The system is easily networked for downloading of recipes and remote access
to operating data.
• Quick and easy viewing of system pressures, water levels, pump and blower
operation, temperature, and fill/drain operation
• Datalogging, traceability and barcode capability
Unsurpassed Torrid Zone Drying Technology
Integrated into the machine cabinet, the Torrid Zone delivers a controlled dynamic
process that effectively removes moisture from the PCB. Typical performance includes
drying complex assemblies to within 0.1 gram of prewashed dry weight. The module
reduces exhaust requirements by 44% and uses 15% less power when compared with
conventional drying systems, providing a rapid return on investment.
AQUASTORM 200SS SPECIFICATIONS
Machine Dimensions (L x W x H) 9683mm (381”) x 1845mm (73”) x 1775mm (70”)
Cleaning Dimensions 508 mm (20") x 102 mm (4")
610 mm (24") x 102 mm (4") - optional
Exhaust Requirements Wet Section: Three (3) 152mm (6”) stacks: 34m/min (1200 SCFM) @ 25mm (1”) of
H
2
O static pressure
With Torrid Zone Option: One (1) 152mm (6”) exhaust #1: 14.1 - 19.8m/min (500 - 700 SCFM) @
25mm (1”) of H
2
O static pressure; One (1) 152mm (6”) exhaust #2: 8.5
- 11.3m/min (300 - 400 SCFM) @ 25mm (1”) of H
2
O static pressure
Standard Utility Requirements 380 VAC, 50 Hz, 3 Phase, 359 amps maximum. Alternate voltages available
Drain Plumbing Requirements Main drain line: 1 ½” male pipe thread stainless steel
Closed-loop drain: 1 ½” male pipe thread stainless steel
Supply Water Requirements Tank ll line: 19mm (0.75”) stainless steel tting (3/4”) - 19-95 l/min (5-25 gpm)
Final rinse supply: 19mm (0.75”) stainless steel tting (3/4”) - 15.14 l/min (4.0 gpm) @ 50
psi, 60°C (140°F) deionized H
2
O
In-line Aqueous Cleaning System