plug-play-alep-automatic-feed-soldering-jbc-0037587_ID-269348_EN.pdf
40 mm 50 mm 60 mm 80 mm 100 mm 130 mm 130 mm par a manuales - neg r o plano 200 mm 300 mm X x T h i s P l u g & P l a y G u i de co r r e sp o n d s t o t h e f o l l o wi n g r e f e r e n c e s : W atch the product…
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - negro plano
200 mm
300 mm
X
x
This Plug & Play Guide corresponds to the following references:
Watch the
product video
Video Guide
Web page of the latest
product version
Information
This Plug & Play Guide corresponds to the following references:
Ref. ALEP-108VA
Ref. ALEP-208VA
Ref. ALEP-908VA
Ref. ALEP-110VA
Ref. ALEP-210VA
Ref. ALEP-910VA
ALEP
Angled Automatic-Feed Soldering Station
2
The following items are included:
Angled Automatic-Feed
Soldering Iron ................................. 1 unit
Ref. ALEP250-A
Pedal ............................................... 1 unit
Ref. P-405
Solder Wire Guide Kit ..................... 1 unit
According to purchased station reference.
Cartridge Holder ............................. 1 unit
Ref. SCH-A
Stand for ALE250-A and ALEP250-A
Automatic-Feed Soldering Iron ...... 1 unit
Ref. ALE-SA
Conical Bent Cartridge Ø 1 ............ 1 unit
Ref. C250403
Cartridge Extractor Pliers ............... 1 unit
Ref. PLR196
Packing List
Installation
Before you can start working, follow the assembly steps in this P&P
Guide.
Note: The solder diameter must match the ALE model purchased.
Make sure the solder wire diameter is compatible with the wheels
already installed in the ALE control unit.
*Solder reel is not included.
Wheels (inside)
Solder Reel *
Tool Stand
Soldering Iron
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
1
2
3
5
4
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - negro plano
200 mm
300 mm
Step 1 Solder Reel Assembly
Reel Locking
Solder Wire
Guidance
Solder Wire
Axis
Solder Reel
Reel Locking
Screw
Solder Wire
Solder Wire
Unwinding
Direction
Solder Wire
Guidance
Loosen the reel locking screw (1) and remove the reel locking from
the axis (2).
Assemble the solder reel onto the axis (3).
Assemble the solder reel in such a way - when viewed from above -
that the solder wire unwinds on the dispensing mechanism side (4).
Then pass the solder wire through the wire guidance (5).
The required tools are located on the control unit.
Tools Needed
Allen Key Ø 2.5Allen Key Ø 1.5
Spanner
Watch the
product
assembly video