TM3355.CheckNozzleBuffingFunctionSpecifications.pdf
Y AMAHA M otor Co. Ltd ., IM Company SMT Software Engineering Grou p MDOC-SOFT50 052 1/27 Check Nozzle Buffing Func tion Specificat ions Conten t s 1. Introduc tion ........ ........... ....... ......... ..... ..........…
YAMAHA Motor Co. Ltd.,
IM Company
SMT Software Engineering Group
MDOC-SOFT50052
1/27
Check Nozzle Buffing Function Specifications
Contents
1. Introduction ............................................................................................................................................ 2
2. Objective ................................................................................................................................................ 2
3. Setting method ...................................................................................................................................... 3
3.1. Machine Setting ............................................................................................................................. 3
3.2. Nozzle Buffing Setting .................................................................................................................. 3
4. Fundamental motion............................................................................................................................. 4
4.1. Execute function ............................................................................................................................ 4
4.2. Result of Checking ........................................................................................................................ 8
5. Schedule specification ....................................................................................................................... 13
5.1. Setting method............................................................................................................................. 13
5.2. Result of Checking ...................................................................................................................... 15
5.3. When an abnormality nozzle is detected ................................................................................. 15
5.4. Result of checking by Schedule Task Monitor......................................................................... 16
6. Restrictions .......................................................................................................................................... 18
7. Others (technical information)........................................................................................................... 18
7.1. Nozzle Buffing Check File .......................................................................................................... 18
7.2. Detail Setting of Nozzle Buffing Check..................................................................................... 19
7.3. Output log ..................................................................................................................................... 22
7.4. Nozzle buffing check result log.................................................................................................. 23
7.5. Motion of machine on the nozzle buffing check ...................................................................... 25
No.
Content of version Page Date
000
Create All 2011/4/20
001
The function which nozzle buffing
check result log file is acquired by
system backup was added.
22 2011/9/15
002
The function executed on a schedule
specification was added.
13 - 17 2011/10/12
YAMAHA Motor Co. Ltd.,
IM Company
SMT Software Engineering Group
MDOC-SOFT50052
2/27
1. Introduction
Target models and target versions are as follows.
Table 1.1 Target model and target version
Target model Target version Remarks
YS12 series mounter
YG12 series mounter
YS24 series mounter
YS24X series mounter
Since VGOS V3.28 R1.00
2. Objective
This function is to check a condition of nozzle buffing any time you like.
The following abnormities can be detected.
- Stiff buffing with the nozzle shorten.
- Completely stiff buffing with the nozzle extended.
- Buffing can slide but not smoothly.
- It not returned, when carrying out buffing, and the nozzle became short.
It can cause mis-picking and miss-mounting if you use such nozzles above, so we recommend
maintenance or exchange the nozzle as soon as an abnormity is detected.
YAMAHA Motor Co. Ltd.,
IM Company
SMT Software Engineering Group
MDOC-SOFT50052
3/27
3. Setting method
3.1. Machine Setting
To use this function, Set [VmSpec] – [Specification Information] – [Buffing check spec] to “Use”.
(See Fig. 3.1.1)
Fig. 3.1.1 Machine setting
3.2. Nozzle Buffing Setting
This function is supported only with nozzles with buffing.
You can see if they have buffing or not from [VmSpec] – [Specification Information] – [Mount
Nozzle Specification] – [Nozzle Data]. (See Fig. 3.2.1)
Fig. 3.2.1 Setting the nozzle buffing