SPS Konfiguration X4i S-X4 S-X3 S.pdf

Configura tion SPS X4 S /X3 S /X4i S

Configuration SPS X4 S /X3 S /X4i S

09.01.2018 Page 2 SIPLACE Smart Pin Support for X Series S

Smart Pin Support (SPS) - Parts: Pin Picker unit

PinPicker

1. Pneumatic valves

2. Pneumatic cylinder

3. Control board

4. Assembly holes

5. Pneumatic tube and electrical cable

6. Linear guide

7. Pin interface

8. Base plate

Three different types of SPS units are necessary to

support the specified length of PCB boards in the

SX1/2 and X4i S/X4 S/X3 S machine. The difference

between this three units are only the base plate to

mount the unit onto the head holder.

03089621-xx SPS unit for SX1/2

03089903-xx SPS unit left for X4i S/X4 S/X3 S

03089904-xx SPS unit right for X4 S/X3 S

See also: Assembly Instruction (Retrofit Manual)

00197394-01_AI Smart_Pin_Support_X-Serie_S

09.01.2018 Page 3 SIPLACE Smart Pin Support for X Series S

Smart Pin Support (SPS) – Parts: magazine and pin

SPS magazine

Support Pin

Three different magazine types are available. The type of

magazine will be recognized via software.

- 5 pin magazine for X4i S/X4 S/X3 S

- 10 pin magazine quadratic for SX1/2 and X4 S/X3 S

- 10 pin magazine lengthwise for SX1/2

Sales-Article No.: 00119995-xx for 5 Pins

1. Calibration garage

2. Position fiducial