manual-tet-heater-hose-set-0029031_ID-223143.pdf

INSTRUCTION MANUAL TET Precision Heater Hose Set

100%1 / 4
INSTRUCTION MANUAL
TET
Precision Heater Hose Set
TC
Suction
OK
TC
Suction
OK
Manual ......... 1 unit
Ref. 0029031
TE Handle ... 1 unit
Ref. TE-B
Heating Element
for TET ......... 1 unit
Ref. 0 012374
(for 100V/120V/230V)
Packing List
The following items are included:
This manual corresponds to the following reference:
TE-TB
Changing TET Heater Hose Set
Only perform this operation when the
station is turned off.
Use a spanner to unscrew the nut (1) and
remove the tool hose (2).
Insert the new hose, make
sure it is pushed all the way
into the connector (2), and
tighten the nut (1).
1
2
2
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
TC
Suction
OK
TC
Suction
OK
Features
TET Precision Heater Hose Set allows to repair small and medium
SMDs . It works with JTU Control Unit and TE Nozzles.
Replacing the Heating Element
Note: Only perform this operation when the heating element is cold
and the unit is disconnected from the mains.
Loosen the screw (1) and pull the worn heating element out of the
handle (2).
Insert the new heating element, make sure its pushed all the way in
(2) and tighten the screw (1).
Heating Element for TET
Ref. 0 012374
(for 100V / 120V / 230V)
TET Precision
Heater Hose Set
Ref. TE-TB
(for 100V / 120V / 230V)
2
1
TE Nozzle*
Tool Button
Start/stop blowing hot air
* not included, sold separately
TE Handle
Ref. TE-B
(for 100V / 120V / 230V)
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm