XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf

Manual Updat e Notice The fol lowing ma nual has bee n revised and re -re l eased: Manual title: XP-142E Operator ’s Guide Manual number (u pdated edi tion ): TUT -XP142- 1.1E Manual number (p revious edition ): TUT -XP1…

Manual Update Notice

The following manual has been revised and re-released:

Manual title: XP-142E Operator’s Guide

Manual number (updated edition): TUT-XP142-1.1E

Manual number (previous edition): TUT-XP142-1.0E

Date of issue: September 10, 2003

The main changes that have been made are detailed in the table below.

Chapter/section Summary of changes

Chapter 1,

1.1 Components Names

and Functions

Illustrations and terminology were revised.

Chapter 3, Explanations of operations were added.

Chapter 4,

4.1 Measurements and

Checks Prior to Production

The Feeder Data screen was corrected.

Minor changes and corrections have also been

made at various locations throughout the manual.

Note:

For a hard copy of the manual, contact your nearest Fuji sales representative or

send an e-mail request to the address below.

E-mail : intnetqst@fuji.co.jp

XP142-E

Operator’s Guide

TUT-XP142-1.1E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manu-

al may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise),

or reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the follow-

ing countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia, Ireland,

Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our prod-

ucts.