TDS-injet-388-CRD_31.10..pdf

www.dct.cleaning TECHNICAL DATA SHEET CHAMBER InJet ® 388 CRD STENCIL, MISPRINT, SQUEEGEE cleaning PUMPRINT cleaning CONFORMAL COATING removing PCB cleaning www.dct.cleaning

100%1 / 8
www.dct.cleaning
TECHNICAL DATA SHEET
CHAMBER
InJet
®
388 CRD
STENCIL, MISPRINT, SQUEEGEE cleaning
PUMPRINT cleaning
CONFORMAL COATING removing
PCB cleaning
www.dct.cleaning
InJet
®
388 CRD
TECHNICAL DATA SHEET
www.dct.cleaning
2
GENERAL INFORMATION
The InJet 388 series cleaning systems represent
unique vertical Spray-In-Air technology developed
and manufactured by DCT.
The vertically installed Spray-In-Air device minimizes the
shadowing eect commonly seen in horizontal cleaners,
and maximizes the eciency of the cleaning process as
the cleaning uid is sprayed directly onto the cleaned
component.
The InJet
®
388 CRD, including a 100% closed loop,
with cleaning, rinsing, and drying technology processes.
All of the processes are fully automated, and take place in
one process chamber.
The InJet
®
388 CRD is developed primarily for the removal
of solder pastes and SMT adhesives from stencils, PumPrints,
squeegees and misprints.
The cleaning system can also be used for PCB cleaning, or
for a combination of PCB cleaning and the afore-mentioned
cleaning processes. The machine can also be used for the
removal of hardened lacquers.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning uid
and the correct setup of the entire process.
InJet
®
388 CRD
TECHNICAL DATA SHEET
www.dct.cleaning
3
CR
D
C
CLEANING
RINSING
DRYING
R
D
Application
name
Recommended
application
Recommended
temperature
Recommended
time
Capacity
per 8 hours
Stencil, misprint, squeegee
20 – 40°C 68 – 104 °F 18 min. 27
PumPrint
40 – 55°C 104 – 131 °F 18 min. 27
Conformal coating
40 – 55°C 104 – 131 °F 60 min. 192 * /16 **
PCB
35 – 55°C 95 – 131 °F 30 min. 384 *
3 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Soldering palette / per 8 hours (calculated for dimension of 320 x 500 x 50 mm / 12.6 x 19.7 x 1.97 in)
LEGEND: