ALFeeder_E.pdf
EUKLU-213-0140 Tape Feeder User’ s Manual Auto Loading Feeder YAMAHA SMT Assembly System
Page links in this manual
Page links in this manual
Page links in this manual
This PDF manual provides the following page links; jump from current page to “Chapter Contents” and
jump from “Chapter Contents” to “General Contents”, other than that from contents to selected page.
The figure below describes the detail.
General Contents
EUKLU-213-0140
General Contents
Introduction
1. About this manual S-1
1.1 Contens of each chapter S-1
2. Safety S-2
2.1 Common precautions S-2
2.2 Safety message S-3
2.3 Keeping body and objects away from moving parts S-4
Chapter 1 Overview
1. Overview 1-1
1.1 Part names and functions 1-1
1.2 Handling precautions 1-4
1.3 Types of Auto loading feeder and available component size 1-8
1.4 Selecting Auto loading feeder with special jig 1-9
1.4.1 Cover tape checker (for checking the seal of cover tape and pocket size) 1-9
1.4.2 Tape cut jig / Tape leveler 1-10
1.5 Available component tape and limitation items 1-11
1.5.1 Limitation items 1-11
1.5.2 Detail of available component tape 1-13
1.5.3 Standard for component tape 1-16
Chapter 2 Handling component tape
1. Preparation for loading component tape 2-1
1.1 Cutting component tape 2-1
1.1.1 New component tape 2-1
1.1.2 Component tape to be reloaded 2-2
1.1.3 Precautions about cutting position of component tape 2-3
1.1.4 Cutting component tape 2-4
1.2 Folding top of component tape 2-6
1.2.1 Folding top of component tape 2-6
2. Loading/Unloading component tape 2-7
2.1 Loading component tape 2-7
2.1.1 Standard type 2-7
2.1.2 IT Option type 2-10
2.2 Unloading component tape 2-13
Click chapter title.
Click
desired content.
Jump to
chapter contents
Jump to top of general contents
Click lower left/right chapter title.
General Contents
Chapter Contents
Desired page
Jump to
desired page
Click upper
left square.
Click desired content.
TIP
See the instruction manual supplied from software distributor for how to use application for browsing digital contents.
General Contents
EUKLU-213-0140
General Contents
Introduction
1. About this manual S-1
1.1 Contens of each chapter S-1
2. Safety S-2
2.1 Common precautions S-2
2.2 Safety message S-3
2.3 Keeping body and objects away from moving parts S-4
Chapter 1 Overview
1. Overview 1-1
1.1 Part names and functions 1-1
1.2 Handling precautions 1-4
1.3 Types of Auto loading feeder and available component size 1-8
1.4 Selecting Auto loading feeder with special jig 1-9
1.4.1
Cover tape checker (for checking the seal of cover tape and pocket size) 1-9
1.4.2 Tape cut jig / Tape leveler 1-10
1.5 Available component tape and limitation items 1-11
1.5.1 Limitation items 1-11
1.5.2 Detail of available component tape 1-13
1.5.3 Standard for component tape 1-16
Chapter 2 Handling component tape
1. Preparation for loading component tape 2-1
1.1 Cutting component tape 2-1
1.1.1 New component tape 2-1
1.1.2 Component tape to be reloaded 2-2
1.1.3 Precautions about cutting position of component tape 2-3
1.1.4 Cutting component tape 2-4
1.2 Folding top of component tape 2-6
1.2.1 Folding top of component tape 2-6
2. Loading/Unloading component tape 2-7
2.1 Loading component tape 2-7
2.1.1 Standard type 2-7
2.1.2 With IT Option 2-10
2.2 Unloading component tape 2-13