EN_FlexPresser_II.pdf
EN FlexPresser II K ey f eatures - High per formance pressing proc ess - 7000N pressing force - Fee der interface for basic f eeding s yst em - Linear motors and NC- C Axis - Support lif t unit for minimized stress on PC…
EN FlexPresser II
Key features
- High performance pressing process
- 7000N pressing force
- Feeder interface for basic feeding system
- Linear motors and NC- C Axis
- Support lift unit for minimized stress on PCB during
insertion process
- Way/Force measurement
- Automatic tool exchange
- Intuitive and user friendly HMI (TS1)
Options
- Edgebelt infeed conveyor
- Walking beam infeed
- Dual infeed conveyor
- Vision program for placement alignment
- 10 kN pressing force
- 1D / 2D Code Reader
- Tool magazine for 4 grippers
- Automatic position correction with fiducial
measurement
FlexPresser II
High performance Pressing Cell
The FlexPresser II is a fully automatic inline system
for high dynamic pressing processes. The panel
is transported into the work position via SMEMA
interface on e.g. an edgebelt conveyor system.
Pins or connectors to be pressed in can be
presented by several types of feeding systems
(e.g. Trayfeeder, Stickfeeder, Bowlfeeder, etc.),
which are connected to the standard FlexPresser II
interface.
The pressing process with up to 7kN (or 10 kN) is
done with way/force control and programmed on
CAD data basis to realize a simple configuration
and continuous process control.
To keep a flexible production running, the product
specific gripper can be exchanged automatically
and stored at the gripper bank. The support plate,
which is mounted above the anvil is supplied with a
manual fast exchange system.
As option a fiducial check can be done with a
camera system to correct the insertion position
regarding to the panel position and orientation.
