JUKI FX-3R Maintenance Manual.pdf
Manua lslib.co m - The Globa l Manu als Libr ary Manuals / Brands / JUKI Ma nuals / Indust rial Equipm ent / FX-3 R / Main tenance m anual / PDF JUK I F X-3 R M AI NT EN AN CE MA NU AL Tab le o f Co nte nts Table of C on…
Manualslib.com - The Global Manuals Library
Manuals / Brands / JUKI Manuals / Industrial Equipment / FX-3R / Maintenance manual / PDF
JUKI FX-3R MAINTENANCE MANUAL
Table of Contents
Table of Contents
Replacing the Magnescale
X-Axis Magnescale Affixing Position
Y-Axis Magnescale Affixing Position
Clearance of the Magnescale
Re-obtaining the Parameters after Replacement of the Magnescale
Replacing the Limit Sensor and Origin Near Sensor
Replacing the X+/− Limit Sensor and X-Near Sensor
Replacing the Y +Limit Sensor and YB-Near Sensor
Replacing the X-axis Interference Sensor (Y-C Sensor)
Replacing the Cable Bear
Replacing the X-Axis Cable Bear
Replacing the Y-Axis Cable Bear
Replacing the Roller Lubrication Part
Replacing and Adjusting the Head
Replacing the Motor
Replacing the Z-Motor
Replacing the θ-Motor
Replacing the Laser Sensor (LNC60)
Replacing the Head Up Cylinder
Replacing the Belts
Replacing the Timing Belt Z
Replacing the Timing Belt θ
Replacing the Z-Slide Shaft
Readjustment After Replacement of Head Unit
Replacing the Solenoid Valves
Replacing the Filter
Replacing the Bad Mark Sensor
Sensor Assembly
Adjusting the Sensor Height
Amplifier
Assembling the Fiber Unit to the Amplifier
Amplifier Setting
Manual Setting Method for the F70R Fiber Sensor Amplifier
Replacing the HMS
Replacing the HMS Head
Replacing the Amplifier
Sticking the Label
Adjusting the HMS Height
Replacing the Head Board
Replacing the Head Main Board
Replacing the ZT-Driver Board
Replacing the OCC Assembly
Replacing the CCD Camera and Lens
Replacing the OCC Coaxial/Angle Light Board Assemblies
Replacing the Lens Filter
Adjusting the Focus
Adjusting the OCC Light Quantity
Replacing the Solder Recognition Light Board
Readjustment After Replacement of OCC Unit
Replacing the Transport Belt
Replacing the Transport Pulley
Transport Pulley A Assembly: E21117150A0
Replacing the STATION, IN, OUT, and JOINT Motors
Replacing the IN and OUT Sensors
Replacing the WAIT, STOP, and C-OUT Sensors
Replacing the Fiber
Replacing the Amplifier Unit
Adjusting the Sensitivity of the WAIT/STOP/C-OUT Sensor
Replacing the Stopper Cylinder
Replacing the Support Table Home Position Sensor (BU Home
Position Sensor)
Replacing the T-PIN Sensor (Optional)
Replacing the Pusher Y Cylinder (Outer Shape Reference)
Replacing the Centering Pin (Optional)
Replacing the Support Table Motor (BU Motor)
Adjusting the Gap between Torque Supporter and Support Motor
Adjusting the Tension of the Support Table Driving Timing Belt
Placing the Support Table Surface Horizontally