TM4807.Long Board Partition Mount.pdf
Long board p artition mou nt fun ction speci fication Conte nt s Long board p artition mount function specification ............... ................... .................... .................. . 1 Contents . .............…
Long board partition mount function specification
Contents
Long board partition mount function specification......................................................................... 1
Contents ........................................................................................................................................ 1
1 Applicable models and software versions .................................................................................. 3
2 Outline ........................................................................................................................................ 3
3 Restrictions................................................................................................................................. 3
3.1 Restrictions when this function is effective .......................................................................... 3
3.2 Restrictions on the board data for long board partition mount ............................................ 4
3.3 Restrictions when machine produces board data for long board partition mount ............... 4
4 Detail .......................................................................................................................................... 5
4.1 Movement of machine ......................................................................................................... 5
4.1.1 Transfer method and mount method............................................................................. 5
4.1.2 Decision method of mount position for each mount...................................................... 6
4.1.3 Existence of “first half mount” parts and “second half mount” parts and the movement
............................................................................................................................................... 6
4.2 Cautions when creating board data..................................................................................... 7
4.2.1 Mount coordinate .......................................................................................................... 7
4.2.2 Block offset.................................................................................................................... 7
4.2.3 Fiducial.......................................................................................................................... 8
4.2.3.1 Board fiducial.......................................................................................................... 8
4.2.3.2 Block fiducial........................................................................................................... 9
4.2.3.3 Local fiducial......................................................................................................... 10
4.2.4 Bad mark..................................................................................................................... 10
4.3 Teach ................................................................................................................................. 12
4.3.1 Mount teach dialog...................................................................................................... 12
4.3.2 Offset teach, fiducial teach, bad mark teach dialog .................................................... 12
4.4 [Convey In] button.............................................................................................................. 13
4.5 History................................................................................................................................ 13
4.6 Editor.................................................................................................................................. 14
4.6.1 Fiducial tab.................................................................................................................. 14
4.6.2 Block distribute and block distribute return ................................................................. 14
4.6.3 Data check .................................................................................................................. 14
4.7 2D code scan (special function) ........................................................................................ 14
4.8 Error message ................................................................................................................... 15
5 I/O address............................................................................................................................... 19
6 Appendix................................................................................................................................... 19
6.1 Setting method................................................................................................................... 19
6.1.1 Distance exit stopper to main stopper [mm]................................................................ 20
6.1.1.1 Measurement procedure of “Distance exit stopper to main stopper” ................... 20
6.1.2 Exit stopper arrival add time [msec]............................................................................ 21
Rev Version Chapter Revised Contents
00 V3.41STD R1.000 or later All Created
The information contained in this message may be confidential and legally protected under applicable l
aw. The
message is intended solely for the addressee(s).
If you are not the intended recipient, you are hereby notified that anyuse, forwarding, dissemin
ation, or reproduction
of this message is strictly prohibited and maybe unlawful.
1 Applicable models and software versions
Applicable items and software version are as below.
Fig 1. Applicable models and software version
Item Name Software Version Remarks
YS12 series mounters
YG12 series mounters
VGOS V3.41STD R1.000 or later
2 Outline
This function is the function to mount long boards in two steps at the main stopper position
(first half mount) and the exit stopper position (second half mount) by the machine equipped
with the "Std. LED (NLED)" conveyor or the "Extension LED (ELED)" conveyor.
3 Restrictions
This function has the following restrictions.
3.1 Restrictions when this function is effective
1. This function requires the "Std. LED (NLED)" conveyor or the "Extension LED (ELED)"
conveyor.
2. Only one board can exist on the conveyor during board transfer when the machine
equipped with the “LED package specs”.
3. The mountable maximum board length is as follows.
4. This function does not support “fiducial all recognition” function. (Data check error
occurs)
5. This function does not support “stride board buffering” function.
6. This function does not support “Op010: 3A Process Control” function.
Conveyor type Maximum board length
Standard conveyor 510mm
Std. LED (NLED), (When using this function) 750mm
Extension LED (ELED)", (When using this function) 1200mm