Prodigy_DLM.pdf
Smar ter , F aster and Highly V ersatile The Camalot® dispenser is designed and built t o deliver extremely accurate dispensing at high speeds, ex ceptional frame stability and state of the art drive systems enable 1.5g …
Smarter, Faster and Highly Versatile
The Camalot® dispenser is designed and built to deliver extremely accurate
dispensing at high speeds, exceptional frame stability and state of the art
drive systems enable 1.5g’s of acceleration and dot/line placement accuracies
less than ± 35 microns at 3 Sigma.
Dual lane conveyors enable improved optimization by allowing two identical
or two dierent products to be processed in either lane. Lanes can also be
congured as “Active” or “Passive/Pass through”, the latter enables direct
transfer to the downstream machine if required when 2 dispensers are
congured together for high throughput applications.
The dual lane concept provides increased throughput and exibility, therefore
greater productivity, as head optimization is increased and product transfer
time decreased.
Available in a compact four-zone, 830mm width system or the larger 1270mm
six-zone system for processing a wide range of product sizes.
Prodigy
™
Dual Lane System
Electronic Assembly Equipment
Features
• 4 or 6 zone congurations, edge clamps or heated chucks
• Product size up to 400mm x 254mm
• 1st and 3rd or 1st and 4th xed rails
• Independent lane width adjust
• Increased productivity
• Multi-tasking of dispense process between lanes
• Board transfer time eliminated
• Interlocked covers allow access to input and output zones
Prodigy Performance Specication Standard Features Additional Options
XY Placement ± 35 microns @ 3 Sigma Laser Z-Sense Dynamic Dual Head (DDH)
XY Repeatability ± 10 microns @ 3 Sigma Needle cleaner Weight Scale
XY Acceleration 1.5g peak Vision system Jet and/or auger pumps
Z-Axis Accuracy ± 25 microns @ 3 Sigma XYZ calibration/purge station Heated chucks/Edge clamps
Z-Axis Repeatability ± 10 microns @ 3 Sigma Benchmark software Independent 2nd Z-Axis
Dot Placement Speed (Jet) 50,000 DPH (3mm pitch) SPC data collection MES - SECS/GEM Interface
See reverse for dual lane conveyor specications
All exisiting Prodigy™ pumps and options are available on the dual lane systems, including the unique and patented
Dynamic Dual Head™ and NuJet™ feature. Both are proven to dramatically improve UPH while maintaining high yeilds.
www.itweae.com
© 2019 ITW all rights reserved. Prodigy DL 1-19
ITW EAE is a division of Illinois Tool Works, Inc. It is a consolidation of all of
its Electronic Assembly Equipment and Thermal Processing Technology. The
group includes world-class products from MPM, Camalot, Electrovert, Vitronics
Soltec and Despatch.
Electronic Assembly Dispensers
Prodigy
™
Dual Lane System
830mm (32”) Dual Lane
l
Details on left shown with 4
zones of board clamping or
heated chucks up to
250mm x 200mm
l
Maximum board length
up to 300mm
1270mm (50”) Dual lane
l
Details on left shown with 6
zones of board clamping or
heated chucks up to
330mm x 254mm
l
Maximum board length
up to 400mm
Ability to dispense a large
board by moving rails 3 and 4
to the rear (consult factory)
All dimensions shown
with Prodigy standard
5mm edge clearance.