00197190-03_VD_SIPLACE_Pro_10_1_SP1_DE_EN.pdf

SIPLACE Pro V ersion 10.1 SP1 Softw are V ersion Descript ion SIPLACE Pro V ersion 10.1 SP1 Sof tw are - V ersionsbeschreibu ng A usgabe 02/2013 Edition

SIPLACE Pro Version 10.1 SP1

Software Version Description

SIPLACE Pro Version 10.1 SP1

Software-Versionsbeschreibung

Ausgabe 02/2013 Edition

All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The

remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes

could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information given in this publication is reviewed regularly and any necessary corrections are included in

subsequent editions.

ASM Assembly Systems GmbH & Co. KG Item-no.: 00197190-03

Rupert-Mayer-Straße 44

81379 München

Germany

www.siplace.com

Alle mit dem Schutzrechtsvermerk ® gekennzeichneten Bezeichnungen sind eingetragene Marken der ASM

Assembly Systems GmbH & Co. KG. Die übrigen Bezeichnungen in dieser Schrift können Marken sein, deren

Benutzung durch Dritte für deren Zwecke die Rechte der Inhaber verletzen kann.

Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der beschriebenen Hard- und Software geprüft.

Dennoch können Abweichungen nicht ausgeschlossen werden, sodass wir für die vollständige Übereinstimmung

keine Gewähr übernehmen. Die Angaben in dieser Druckschrift werden regelmäßig überprüft und notwendige

Korrekturen sind in den nachfolgenden Auflagen enthalten.

ASM Assembly Systems GmbH & Co. KG Artikel-Nr.: 00197190-03

Rupert-Mayer-Straße 44

81379 München

Deutschland

www.siplace.com

SIPLACE Pro V10.1 SP1 / Software Version Description Ausgabe 02/2013 Edition

Contents

1 Introduction 5

1.1 System Overview .............................................................................................. 5

2 Scope of Delivery 6

2.1 Packages .......................................................................................................... 6

2.2 Languages ........................................................................................................ 7

2.3 Licenses ............................................................................................................ 8

3 Prerequisites 10

3.1 LINUX/ UNIX Line Computer ........................................................................... 10

3.2 Supported Platforms, Station Software Versions and Machine Types ............. 11

3.3 Supported Feeder Types ................................................................................. 13

3.4 New Positions and Supported PCB Widths for Fixed Rails in SX1/SX2 V2 ...... 14

4 Features of SIPLACE Pro 10.1 SP1 15

5 Features of SIPLACE Pro 10.1 16

5.1 SIPLACE X-Series S – X3 S, X4 S, X4i S Placement Machines ...................... 16

5.2 New Conveyor System for SIPLACE X-Series S ............................................. 16

5.3 Station Software Version 706.x ....................................................................... 16

5.4 New TrayStak Feeder AX Feeder Type ........................................................... 17

5.4.1 Behavior at Pick-up Errors ............................................................................... 18

5.5 Placement of Tall Components with Very High Force Pick&Place Head and

WPC5 / WPC6................................................................................................. 19

5.6 SIPLACE GlueFeeder Feeder Type ................................................................ 19

5.7 Simplified Component Shape Editor ................................................................ 20

5.7.1 Automatic Settings when Selecting Pick-up Process ....................................... 20

5.7.2 Revised Display of the Height Entries Meanings ............................................. 21

5.7.3 Specified Pick-up Process for nnn5 and nnn6 Nozzles .................................... 21

5.7.4 Warning at Too Low Number of Re-picks ........................................................

5.7.

5 Setting Acceleration Reduction ........................................................................ 22

5.7.6 Lower Pick-up Tolerance Limit for Components .............................................. 23

5.7.7 Lower Limit for Component Shape Dimensions ............................................... 24

5.8 Feeder Parameter Management ...................................................................... 25

5.8.1 Handling Options ............................................................................................. 25

5.8.2 Random Setup Settings ................................................................................... 26

5.8.3 Automatic Calculation of the Pick-up Position for Asymmetrical

Components .................................................................................................... 27

5.8.4 Saving the X-/Y-positions ................................................................................ 28

5.8.5 Specifying User-defined Pick-up Position (PuP) .............................................. 29

5.9 Locking Desk / Line Control GUI Automatically................................................ 30

5.10 Random Setup - Enhancements ...................................................................... 31

5.10.1 Dialog for Missing Components ....................................................................... 31

5.10.2 Support of Station-Wise Download .................................................................. 32

5.11 SIPLACE LED Pairing – Enhancements in SIPLACE Pro ................................ 33

5.12 Alternative Components on <705.xx Platforms ................................................ 35

5.12.1 Creating a Recipe Copy .................................................................................. 35

5.12.2 Deleting Created Recipe Copies ..................................................................... 37

5.12.3 Downloading Created Recipes ........................................................................ 38

5.12.4 Configuring Alternative Components Function ................................................. 39

5.13 SiCluster Professional – Enhancements .......................................................... 41