TDS_InJet_3179_CRD_bigboard_eng.pdf
CHAMBER TECHNICAL DATA SHEET InJet ® 3179 CRD www.dct.cleaning STENCILS cleaning MISPRINTS cleaning InJet ® 3179 CRD ST S SLIDE TUBE SYSTEM
CHAMBER
TECHNICAL DATA SHEET
InJet
®
3179 CRD
www.dct.cleaning
STENCILS cleaning
MISPRINTS cleaning
InJet
®
3179 CRD
STS
SLIDE TUBE SYSTEM
Dimensions (w x l x h) 1135 x 2130 x 2015 mm
Weight 800 kg
Ø energy consumption per 1 cycle 2,5 kWh
Cleaning uid consumption per 1 cycle 0,2 – 0,4 l
Compressed air consumption per 1 cycle 3 l / 5 Bar
Max. dimensions of the cleaned parts 100 x 1700 x 900 mm
Exchangeable mechanical lter of cleaning uid 20 - 100 μm
Exchangeable mechanical lter of rinsing uid 5 - 20 μm
Operating pressures Cleaning 1,5 Bar - 3,1 Bar
Rinsing 0,8 Bar - 1,5 Bar
Cleaning uid ow rate 250 l/min
Temperature range setting of the cleaning uid From ambient temperature to 60°C
Temperature range setting of the rinse uid From ambient temperature to 60°C
Conductivity range settings of the rinse uid 0 – 200 μS/cm
Temperature range setting of the drying From ambient temperature to 80°C
Noise level < 70 dB
Device control PLC + 8,4“ touchscreen
TECHNICAL PARAMETERS
Power supply 400 V, 50Hz (3+N+PE)
Power connection EU 32 A
Pmax 18 kW
Connection to central air pressure Pipe Ø 6 mm a Ø 10 mm
Recommended working pressure 5 Bar
Exhaust pipe diameter 2 x Ø 100 mm
Exhaust pipe capacity 720 m
3
/h
Volume of the storage tanks for cleaning 125 l
Volume of the storage tanks for rinsing 125 l
Service space required around the device 600 mm
INSTALLATION REQUIREMENTS
www.dct.cleaning
InJet
®
3179 CRD
TECHNICAL DATA SHEET
Application name Recommended
application
Recommended
temperature
Recommended
time
Capacity
per shift
Stencils
20 – 40°C 20 min. 48*
Misprints 20 – 40°C 20 min. 1680 **
3 INDIVIDUAL PROCESSES
CLEANING PARAMETERS
highly recommended
stencil (736x736 mm) per 8 hours (work shift)
eurocards (100x160 mm) per 8 hours (work shift)
*
**
www.dct.cleaning
C
R
D
InJet
®
3179 CRD TECHNICAL DATA SHEET
C
CLEANING
RINSING
DRYING
R
D