Maintenance (Micron) workbook Iss07.pdf
在线预览 Maintenance (Micron) workbook Iss07.pdf PDF 文档。
Issue 6, Nov 14
3
INDIVIDUAL PERFORMANCE CHECKLIST
Name: Department:
Job Title: Shift:
Line Number:
Objectives Date Trainee Instructor
Introduction (Mandatory)
A1 Locate the hazardous areas of the machine
A2 Locate the main assemblies of the printer
A3 Navigate the manuals and sources of information
M-MO Machine Overview
MO1 Identify initialization sequence
MO2 State monitor areas
MO3 Create a product file
MO4 Setup synthetic fiducials
MO5 Setup video models
MO6 Identify print cycle sequence
MO7 Demonstrate how to recover from common error
messages
M-ET Electrical theory and Troubleshooting
ET1 Demonstrate the use of diagnostics
ET2 Identify power supply and E-stop components
ET3 Monitor DC Voltages using power monitor software
ET4 Identify electronics enclosures and PCB’s
ET4.1 Identify each part of the PC
ET4.2 Identify each part of the Machine Controller
ET5 Carry out PCB removal and replacement procedures
ET6 Identify all sensors and switches used on the machine
ET7 Identify rotary motor types used on the machine
ET8 State the components of a typical DC drive axis
ET9 State the components of a typical Stepper drive axis
ET10 State the components of a CAN open servo drive axis
ET11* State the components of a linear motor drive axis*
ET12* Interpret linear encoder LED states*
ET13* Interpret EuroFlex LED states*