PSE_300_2HD_TI_EN.pdf
Page 1 of 4 11/2021 The kolb PSE economy line is a quality series of advanced cleaning systems, which focuses on all essential criteria for a qua- lified cleaning process and therefore stands for attractive purchase pric…
Page 1 of 4
11/2021
The kolb PSE economy line is a quality series of advanced cleaning systems, which focuses on all essential criteria for a qua-
lified cleaning process and therefore stands for attractive purchase prices.
kolb PSE 300 2HD is a fully automatic system for reliable precision cleaning of screens, stencils, PumpPrints or other flat pro-
ducts. It removes thoroughly contaminations such as SMD-paste, SMD-adhesive, flux residues, stabilizer materials, flux, oil,
grease or dust.
PSE 300 2HD is a German engineered and manufactured machine with ClosedLoop water reprocessing and a two-tank and
two separate circuits configuration which ensures short cycle times and makes this system the perfect economic choice for the
cleaning of screens and stencils.
The cleaning system can be operated with all common electronics cleaning supplies (detergents / chemistry, etc.)
which are approved by the manufacturer.
Two-tank system with two separate circuits
Comfortable push one button operation
Fully automatic 3step process: cleaning, rinsing, HotSpeed warm air drying
Vertical rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
Short cycle times due to placing the cleaning goods close to the spray rotors
Water-free operation possible: Due to the separate double tank configuration the system can operate with suitable
cleaning / rinsing detergents for rinsing
Process and service intervals PLC controlled, event issuing and software control via 3,5" touch screen
Safe installation close to the production line / screen printer possible, no special protection required
Extremely compact - maximum capacity on a small footprint
Cleans screens, stencils and PumpPrints from SMD paste,
SMD adhesive, soldering support substances, oil & dust
Capacity: Screen, stencil, carrier, washing frame up to
950 x 780 mm (37.5" x 31")
Part number: 0905PSE31HD2
Fully automatic two-tank economy system with two separate
circuits and ASYNCHRO
®
double rotor system
Misprints (unmounted)M-TeCK stencilsStencilsScreens
PSE 300 2HD
Compliant
RoHS
Compliant
WEEE
ClosedLoop
PowerSpray
®
Made in Germany
CLEANING TECHNOLOGY
Certifications:
This system in its basic version was certified for its energy and water-
saving processing, for easy operability and for the standard integration
of comprehensive safety features.
kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich ▪ Phone: +49 (0) 2154 9479 - 38 ▪ Fax: +49 (0) 2154 9479 - 47 ▪ e-mail: info@kolb-ct.com ▪ www.kolb-ct.com
Key applications
All rights for changes reserved that lead to technical improvement. © kolb GmbH 2021
Most suitableOptional suitable Optional suitable Not suitable Not suitable
Cleaning (key process 1): From the cleaning tank (A) the cleaner liquid is sucked by a magnetically coupled pump unit and
routed with a controllable volume flow through a separate circuit into the ASYNCHRO
®
spray rotor nozzles. Their geometry
ensures a comprehensive and thorough cleaning, even in inaccessible and critical aereas. After the washing procedure, the
valve switchover of the process chamber undocks the cleaning circuit until the next process run.
Rinsing with tap water (key process 2): From the rinsing tank (tank B) the water is pumped through the separate second cir-
cuit into the spray rotors. Tap water has (compared to DI / DM water) the advantage of lower surface tension and thus flushes
also critical points as low standoffs and appertures more efficient.
Drying (key process 3): Drying is carried out by a HotSpeed warm air unit with fan and heating coil in a single air duct. The
residual moisture on the product is evaporated at 40 - 45 °C (104 - 113 °F).
Cycle time (approx. 30 min.) depending on medium selection or degree of contamination
Maintenance: The system has two large maintenance doors on the right and left side. The maintenance room contains,
among other things, the pump-off unit and the optional re-dosage unit with space for a 25 l detergent canister. The tank levels
as well as pressure values and maintenance cycles are monitored by the PLC and displayed on the monitor.
Page 2 of 4
Part number: 0905PSE31HD2
Fully automatic two-tank economy system with two separate
circuits and ASYNCHRO
®
double rotor system
11/2021
PSE 300 2HD
Made in Germany
CLEANING TECHNOLOGY
kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich ▪ Phone: +49 (0) 2154 9479 - 38 ▪ Fax: +49 (0) 2154 9479 - 47 ▪ e-mail: info@kolb-ct.com ▪ www.kolb-ct.com
Application overview
Assembled PCBs
Hybrids
Misprints
Stencils
Screens, PumpPrints
Misprints
Solder frames
Solder carriers
Solder masks
ESD Boxes
Containers
Magazines
Condensation traps
Filters
Steel sheets
Optional suitable applications can also be optimally realized with the appropriate options.
All rights for changes reserved that lead to technical improvement. © kolb GmbH 2021
Main standard features
□ PowerSpray
®
technology bundle: magnetically coupled S-Power pump units (tank A, tank B), twofold ASYNCHRO
®
volume-
spray rotorsystem with PUSHFORCE
®
nozzles, "Option100" softwareprogram (100 freely selectable programs)
□ EATON Programmable Logic Controller (PLC)
□ High resolution 3.5" touch display
□ Full flow coarse filter (process chamber)
□ Sediment filter for cleaning tank (A)
□ HotSpee warm air dryer
□ ClosedLoop reprocessing of cleaning and rinsing fluids
□ Safety features: safety interlock on the process chamber door, overflow alarm for all tank sections, overheating protection for
all heating and drying elements, end switches for all motor-driven valves and drives, personnel protection insulation
□ Front cover made of stainless steel, side and rear covers in painted steel
□ Process sections made of electrolysis resistant elements
Main options
□ Automatic re-dosage unit for 25 l detergent container
□ Drip & storage reservoir
□ Exchange for rinse water and pump out unit
□ Exhaust control
□ Status light fivefold to display the current process state
Page 3 of 4
Part number: 0905PSE31HD2
Fully automatic two-tank economy system with two separate
circuits and ASYNCHRO
®
double rotor system
11/2021
PSE 300 2HD
Made in Germany
CLEANING TECHNOLOGY
kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich ▪ Phone: +49 (0) 2154 9479 - 38 ▪ Fax: +49 (0) 2154 9479 - 47 ▪ e-mail: info@kolb-ct.com ▪ www.kolb-ct.com
All rights for changes reserved that lead to technical improvement. © kolb GmbH 2021