TK33045_PickHeightTeaching.pdf
2nd SMT Engineering Division Softw are Gro up IM Operations Y AMAHA MOTOR CO., L TD MD OC-SOFT50389 1/24 P ick H eight T eaching Function S pecifications Changes are mar ked with [ ▲ (rev)]. Rev V ersio n Chap…
2nd SMT Engineering Division Software Group
IM Operations
YAMAHA MOTOR CO., LTD
MDOC-SOFT50389
1/24
Pick Height Teaching
Function Specifications
Changes are marked with [▲ (rev)].
Rev Version Chapter Contents
00 V4.48STD R1.000 ALL Created
01 V4.50STD R1.000
V3.45STD R1.000
3
4.3
Fixed board has been supported.
(▲1)
02 V4.52STD R1.000
V3.47STD R1.000
ALL 12mm or larger feeders have been supported
(▲2)
03 V3.47STD R1.000
V4.52STD R1.000
ALL Tray feeder has been supported.
(▲3)
本文書に含まれる技術内容は当社の秘密情報です。当社の許諾無く第三者への開示はできません。
The information contained in this message may be confidential and legally protected under
applicable law. The message is intended solely for the addressee(s).
If you are not the intended recipient, you are hereby notified that any use, forwarding,
dissemination, or reproduction of this message is strictly prohibited and maybe unlawful.
2nd SMT Engineering Division Software Group
IM Operations
YAMAHA MOTOR CO., LTD
MDOC-SOFT50389
2/24
Contents
1. Machine Type and Software Version .................................................................................. 3
2. Overview ............................................................................................................................. 3
2.1 Target ............................................................................................................................ 4
3. Function Details .................................................................................................................. 5
3.1 Using Method ................................................................................................................ 6
3.2 Response to12mm or larger feeders
(▲2)
..................................................................... 7
3.3 Response to Trays
(▲3)
................................................................................................. 8
3.4 Pick Height Take Over Function ................................................................................... 9
3.5 Error Message............................................................................................................. 10
4. Setting Method .................................................................................................................. 14
4.1 Machine Setting .......................................................................................................... 14
4.2 Takeover of Parts Data................................................................................................ 19
4.3 Reading fixed board data ............................................................................................ 20
5. Limitations ......................................................................................................................... 21
6. Suggestions at upgrading software .................................................................................. 22
6.1. Mark data setting for guide recognition ..................................................................... 22
2nd SMT Engineering Division Software Group
IM Operations
YAMAHA MOTOR CO., LTD
MDOC-SOFT50389
3/24
1. Machine Type and Software Version
This function is supported for the following machine type and software version.
Table 1.1 Machine Type and Software Version (8mm or smaller)
Machine・Software
Version Note
YSM40, YSM20 V4.48STD R1.000 or later
YS100, YS12 series
YS24(X) series
V3.45STD R1.000 or later
In the following version, 12mm or larger feeders are supported with this function.
(▲2)
Table 1.2 Machine Type and Software Version (12mm or larger)
Machine･Software
Version Note
YSM40, YSM20 V4.52STD R1.000 or later
YS100, YS12 series
YS24(X) series
V3.47STD R1.000 or later
In the following versions, Tray feeder is supported with this function.
(▲3)
Table 1.3 Machine Type and Software Version (Tray feeder)
Machine/Software Version Note
YSM40, YSM20 V4.52STD R1.000 or later
YS100, YS12 series
YS24(X) series
V3.47STD R1.000 or later
2. Overview
This function measures pick height properly by checking vacuum level at moving the head to
the tape guide of a feeder. This function measures pick height properly by checking vacuum
level at moving a head close to the target pick height.
To determine pick height, it used to be necessary to measure the tape thickness by caliper,
and to adjust the height considering pick up rate. With this function, pick height is
automatically measured properly, so that you don’t need to create height data before the first
use of the machine.