BF-10BT.pdf

BF-10BT Simult aneou sly Inspe ct s Both Sid es of PCBs Real- t ime Def ect ion Ma nagem ent and An alysis Coax ial Overh ead Light Reducing In spec tion Proc ess High Resolut ion Im aging Syste m Suita ble for Final In …

100%1 / 2
BF-10BT
Simultaneously Inspects Both Sides of PCBs
Real-time Defection Management and Analysis
Coaxial Overhead Light
Reducing Inspection Process
High Resolution Imaging System
Suitable for Final Inspection Process
Advantage of Line Scan Visual Inspection
Improved Operability
Machine Overview
Off-line Simultaneous Double-Sided
Automated Optical Inspection System
BF-10BT
The BF-10BT has been developed for the end of line inspection,
it performs a simultaneous Automatic Optical Inspection of both
sides of the PCB. It fully inspects both SMD and hand placed parts
including PTH.BF-10BT can detect overlooked defects from earlier
processes and improve the quality of your products.
BF-10BT is the automated optical inspection system which inspects
both sides of double-sid
ed PCBs at once. Due to this the system
achieves the same inspection speed as single side inspection
systems. It is equipped with two cameras for scanning per each
side of a PCB using Saki's unique alternate scanning technology. It
has 40 mm clearance on both sides; therefore it is suitable for the
final inspection process after all component assembly.
In a double-sided PCB mounting process, defect
s might occur on
Side A during the mounting process of Side B. In order to find such
defects, two inspection machines and a PCB flipper are usually
needed for the final inspection process. Installation of BF-10BT,
integrates all of these systems into one.
BF-10BT is capable of inspecting both sides simultaneously at high
speed. It is a suitable solution for the final process. However it is
also be
a solution for acceptance inspection post SMD before back
end assembly process.
Soldering condition is inspected by illuminant irradiation of coaxial
overhead lighting. With the use of coaxial lighting shadows are
not generated and, the inspection is not affected by the shadow of
neighboring tall components. Therefore, the same library is fully
usable at any location of the board.
With the real-tim
e SPC display function, BF-10BT provides the real-
time production management enabling efcient productivity and quality.
It can be networked with an extensive range of optional systems (BF-
Editor/BF-RP1/BF-View) to provide off line programming, paperless
rework and inspection history.
With 10 μ m resolution, BF-10BT provides accurate and stable inspection
of 0402 mm (01005 in.) chips. The newly deve
loped color capturing system
takes only 8 seconds to scan M-size board (250 x 330 mm, 10 x 13 in.).
Extra components on a PCB can be detected by setting up only one
inspection window for the whole board. This advantage is offered
thanks to our line image acquisition technology means that any
damage such as scratches, solder balls or contamination on side A
resulting from side B assemble can be foun
d.
In addition to "Start Button", BF-10BT is equipped with "OK /NG
Button" so that the operator doesn't have to use keyboard or mouse
during its automatic operation.
BF-10BT
Gl ob al Netw or k
http://www.sakicorp.com
E-mail:sakicorp@sakicorp.com
Saki CorporationSaki Corporation
Headquarters
Ogawa Building, 4-14-7, Nakanobu,
Shinagawa-ku, Tokyo, Japan, 142-0053
TEL：+81-3-5788-6280 FAX：+81-3-5788-6295
Dimensions Sysmtem Specications
900 mm
850 mm
1405 mm
1130 mm
1960 mm
(125 mm)
正面図
背面図
側面図
側面図
(キーボード台使用時 : 1530 mm)
900 mm
850 mm
1405 mm
1130 mm
1960 mm
(125 mm)
正面図
背面図
側面図
側面図
(キーボード台使用時 : 1530 mm)
900 mm
850 mm
1405 mm
1130 mm
1960 mm
(125 mm)
Front View
Rear View
Side View
Side View
(Keyboard stand open : 1530 mm)
©
2013 Saki Corporation. All Rights Reserved.
Specifications contained in this flyer are subject to change without notice.
This flyer was made out in August 2013.
SJ321DCF1-01E
Installation Specications
Electric Power
Requirement
Single Phase
～
100 - 120V / 200 to 240V +/-10%,
50/60Hz, 800VA
Air Requirement
0.5MPa, 5L/min (ANR), 73PSI, 0.18CFM
Usage
Environment
15
°
C
(59F) - 30
°
C
(86F) / 15 - 80% RH
(Non-condensing)
Dimensions 850(W)
×
1405(D)
×
1130(H)mm
Weight
Approx.
420kg
Front View
Side View
Model BF-10BT
Resolution 10μm
Board Size
50 x 50mm - 250 x 330mm
Board Thickness
0.6mm - 3.2mm
Board Warp
+/-1mm
PCB Clearance
Top：40mm, Bottom：40mm
(*1)
Rotated Component
Support
Available for 0 to 359°rotation (unit of 1°)
Inspection
Categories
Presence/Absence, Misalignment,
Tombstone, Reverse, Polarity, Bridge,
Foreign material, Absence of solder,
Insufcient solder, Lifted lead, Lifted chip, and
Fillet defect
Tact Time
Approx. 14
sec.
(*2) (*3)
(250×330mm)
Image Scanning
Time
Approx. 8
sec.
(*2)
(250×330mm)
Camera
(Image
Processing)
Line color CCD camera
Lighting LED lighting system
Operating System
Windows 7 Professional 64bit
Optional System BF-Editor / BF-RP1 / BF-View
Optional
2D Barcode Recognition, Journal Printer,
BlackLight (Conformal Coating Inspection)
(*4)
(*1) e.g. when a PCB’s thickness and warp are 1 mm, the top clearance is 38 mm and the bottom clearance is 40
mm from the PCB surface.
(*2) If a PCB size is smaller than 250x330mm,
image scanning time will be shorter than these values.
(*3) Including image scanning time.
(*4) When choosing this optional, PCB Clearance is Top : 30 mm, Bottom : 30 mm.