Diaphragm-Valve-TS5624DMP-Data-Sheet.pdf

KEY  FEATURES  AND  BENEFITS  Disposable material path – no cleaning  Compact size and weight  Excellent moisture sensitive re sistance  No special tools requir ed  Low cost of ownership  Accurate and repeatable…

KEYFEATURESANDBENEFITS



Disposable material path – no cleaning

 Compact size and weight

 Excellent moisture sensitive resistance

 No special tools required

 Low cost of ownership

 Accurate and repeatable dispensing

TYPICALAPPLICATIONS

 Dispensing pre-mixed 2-part epoxy.

 Dispensing Cyanoacrylate in bonding applications

 Applying a of UV lacquer in CD/DVD spin coating applications

& Canada +1 714 230 2398 Europe +44 2380 489 100 Asia +86 21 64952662 www.techconsystems.com

The valve comes with the following items:

 Mounting bracket kit

 Valve air hose

 Luer lock fluid line

 Sample packet of DMP inserts

 Dispensing tip selection pack

Product Data Sheet

TS5624DMP Disposable

Material Path Diaphragm Valve

The TS5624 Disposable Diaphragm Valve features a “first to

market” Disposable Material Path. Difficult fluids such as CA’s

and pre-mixed 2-part epoxies, can now be dispensed without the

need of frequent cleaning, by simply replacing the entire wetted

area in a matter of seconds, while the valve stays on the

production line.

The wetted parts are manufactured from black Polyethylene to

prevent moisture and UV light come into contact with the

dispense fluids. As a result, moisture sensitive fluids such as

Cyanoacrylate and UV cured adhesives can be dispensed

reliably and accurately.

The TS5624 dispenses low to medium viscosity fluids over a wide

range of shot and bead sizes, down to a fraction of a micro liter.

An internal spring return makes the valves fully adaptable for use

with Techcon Systems controllers. A short opening stroke

provides an extremely fast and positive shut-off.

The seal-less valve design offers an excellent moisture sensitive

resistance and the incorporated diaphragm creates a barrier

between the wetted parts and the air cylinder.

Dimensions are in inches [mm]

SPECIFICATIONS&PARTNUMBERS

TYPICALSETUP

Part Number: TS5624DMP

Size

See drawing

Weight: 0.25 lb (113g)

Fluid Inlet Port: Luer lock female

Fluid Outlet Port Luer lock male

Aux Air Inlet Port: 10-32 UNF female

Activation Pressure

Range:

70 psi - 90 psi

(4.8bar - 6.2bar)

Max Fluid Pressure: 60 psi (4.1bar)

Mounting Port: 10-32 UNF female

Viscosity Range: 1 - 50 000cps

Wetted Parts:

Black Polyethylene

Compound

LOCAL DISPENSING SOLUTIONS WORLDWIDE

Actuating

Air Input

Air Cylinder

 Replacement DMP Insert: DMP-5624

 Syringe Bracket: 7509-9100 fits all syringe sizes.

 Fitting kit: VFKIT – for 1/4” OD tubing connection

 Fluid Reservoirs: TS1254 or TS1258 pressure tank

Note: The TS1254 and TS1258 come with standard 1/4” OD

tubing so the VFKIT will be required to make the connection.

 Dispense Tip: For complete dispense tip selection please visit

www.techconsystems.com

Flow Control

Adjustment

DMP

ACCESSORIES

Fluid Inlet

Actuator

For Sales and Support:

Techcon Systems Corporate Headquarters,

12151 Monarch Street, Garden Grove,

California, 92841, USA.

Tel: 1-714-230-2398, Fax: 1-714-230-2393

E-mail: oemorders@okinternational.com

Techcon Systems European Corporate Office,

Eagle Close, Chandler’s Ford Industrial Estate,

Eastleigh, Hampshire, SO53 4NF, UK.

Tel: +44 2380 489 100, Fax: +44 2380 489 109

E-mail: europe-orders@okinternational.com

Or visit www.techconsystems.com

Piston

Version 2.00

Luer Lock