STEELRED-LayoutFluid.pdf

STEEL RED™ Layout Fluid DIRECTIONS Apply to a surface that is clean, dry and free of oil and grease. Apply a thin film to surface. FEATURES Steel Red provides a uniform deep color that prevents glare and eye strain. Allo…

STEEL RED™

Layout Fluid

DIRECTIONS

Apply to a surface that is clean, dry and free of oil and grease.

Apply a thin film to surface.

FEATURES

Steel Red provides a uniform deep color that prevents glare and eye

strain.

Allows for sharp, clear, and precise scribes.

Provides a thin film without cracking/chipping and adds practically no

thickness to work surface.

Meets A-A 59168 dated 21st May 2014 paragraph 3.1.1 thru 3.2.4.4

with the exception of 3.3(chemical resistance to chlorinated solvents).

Dries within minutes.

Reveals defects and pinholes in a variety of surfaces.

Great for inspection of gear tooth contact patterns.

Available in multiple package sizes.

Does not contain any reportable amounts of Xylene.

MATERIALS COMPATIBILITY

Safe on most surfaces

Removable with DYKEM

Remover & Cleaner.

Surface tests should be run to determine compatibility prior to use

HEALTH AND SAFETY

Flammable liquid and vapor. Keep away from heat, sparks and flame.

Use only with adequate ventilation. Avoid contact with skin and eyes.

PHYSICAL PROPERTIES

Appearance / Physical State Red

Odor Alcohol

Specific Gravity <1

VOC Content 92% - 94% by weight

Flash Point 53°F

Dry Time < 2 minutes (Note: Drying time may

vary depending on film thickness)

Shelf Life 3 years

AVAILABLE IN

Net

Contents

Cnt. Type Units/

Case

Approx.

Case Wt.

Part #

12 oz / 340 g aerosol 12 13 lbs 80096

2 oz felt tip

applicator

12 3 lbs 80296

4 oz brush-in-cap 12 4 lbs 80396

8 oz brush-in-cap 12 6 lbs 80496

1 qt bottle 12 25 lbs 80696

1 gal bottle 4 32 lbs 80796