TT5731.Pallet Number Automatic Decision.pdf
SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO.,L TD MD OC-SOFT50020 1/6 Pa ll et Number A utomatic Decisio n Content s Pallet Num ber Autom atic Decision ..... ..... ...... ...... .... ..... ..…
SMT Software Engineering Group
IM Operations
YAMAHA MOTOR CO.,LTD
MDOC-SOFT50020
1/6
Pallet Number Automatic Decision
Contents
Pallet Number Automatic Decision .................................................... 1
1. Introduction ..................................................................... 2
2. Summary ....................................................................... 2
3. Specifications ................................................................... 3
4. Settings ........................................................................ 4
5. Items that are changed by optimization.............................................. 6
Revision No. Upgrade Changes
000 2009/06/29
Create
001 2010/10/28
Explanation of the parts that are not target of “Pallet Number
Automatic Decision” was added in “3. Specifications”.
SMT Software Engineering Group
IM Operations
YAMAHA MOTOR CO.,LTD
MDOC-SOFT50020
2/6
1. Introduction
Thetargetmodelandversionareasfollows
Table
TableTable
Table1
11
1TargetmodelandTargetversion
TargetmodelandTargetversionTargetmodelandTargetversion
TargetmodelandTargetversion
Item name Object Remarks
Target model YS series mounter
Y.FacT
Target version Machine: V3.09 STD R1.000 or later
Y.FacT: V1.09 STD R1.000 or later
2. Summary
This optimization decides pallet assignment for tray parts, when there are tray parts on the
board data that needs to be optimized.
This function sets tray parts from the top of the tray changer in order not to overlap pallet
numbers among the tray parts. It saves your time and effort to distribute pallet number manually
by taking away of overlapping pallet numbers among the tray parts.
SMT Software Engineering Group
IM Operations
YAMAHA MOTOR CO.,LTD
MDOC-SOFT50020
3/6
3. Specifications
This function has the following specifications. Please read the following sentences
certainly, and use it with care.
1. The following parts are not target of “Pallet Number Automatic Decision”.
The pallet numbers of the following parts might overlap.
- All tray parts when [Set optimization parameters] - [Basic Condition] - [Exec Condition] -
[Feeder Set Condition] is set to "All Parts Fixed".
- The tray parts whose [Parts] - [Option] - [Use Feeder Optimize] is set to "No".
- The parts whose parts name is the same as that of the tray parts registered in the fixed
board.
2. This function decides machines / tray changers / pallet numbers by optimization, but it does
not change the pick position ([Parts] - [Pick] - [X (mm)]、[Y (mm)]) etc.
When the parts needs assigning to the tray changer with different outside shape of the pallet
or differentorigin of the pallet by the optimization. Please confirm the pick up position by
teaching on the mounter.
3. This function can only assign one parts type to one pallet by optimization. Until now, if there
is some space on the pallet, the pallet can put plural parts with plural parts types on the
same pallet No, but when “Pallet Number Automatic Decision” is executed, the tray parts
which are put on one pallet become one parts type only.
Figure 3.1 A pallet after optimization