Printer 710_810 v8 Air Ionizer Module.pdf
AIR IO NIZER MODULE OVERVIEW Chapter Issue 2 Oct 06 Technical Reference Manual 25.1 CHAPTER 25 AIR IONIZER MODULE OVERVIEW Item Description Item Descriptio n 1 Air In (i n 2 position s) 4 Air Ioniz er Electrodes (in 8 po…
AIR IONIZER MODULE
OVERVIEW
Chapter Issue 2 Oct 06 Technical Reference Manual 25.1
CHAPTER 25 AIR IONIZER MODULE
OVERVIEW
Item Description Item Description
1 Air In (in 2 positions) 4 Air Ionizer Electrodes (in 8 positions)
2 Air Ionizer Bracket (in 2 positions) 5 Air Regulator
3 Air Ionizer
3
4
5
2
1
AIR IONIZER MODULE
OVERVIEW
25.2 Technical Reference Manual Chapter Issue 2 Oct 06
The air ionizer reduces the amount of static electricity that may be generated
by the pump print process to <200 volts making it safe for most static sensitive
components mounted on the next board entering the machine.
An array of eight electrodes ionizes the air with a continuous stream of positive
and negative ions at the rate of 33Hz. An air supply is connected to the air
ionizer and routed through the eight electrodes ensuring a wide dispersal of
ionized air and increasing the speed of static reduction.
The air ionizer is connected to the 24V switched supply and is disabled when
the printhead cover/shutter is open or the E Stop is pressed.
NOTE
Although the air ionizer is electrically disabled, air pressure continues to flow
through the electrodes.
AIR IONIZER MODULE
ELECTRICAL SCHEMATIC
Chapter Issue 2 Oct 06 Technical Reference Manual 25.3
ELECTRICAL SCHEMATIC
M37 Power
Supply Enclosure
Air Ionizer
M37PL11
24V SW
OV
8PL100
24V SW
OV