N5227B.pdf - 第51页

Find us at www. keysi ght.com Page 51 Test Port Input Table 48 . Noise Floo r (dBm) @ 10 Hz I FBW , All Options, All Ports Total aver age (rms ) noise p ower calcu lated as the mea n value of a linear m agnit ude trace e…

100%1 / 90
Find us at www.keysight.com Page 50
Table 47. Phase Noise (dBc/Hz), All Options, without UNY, All Ports – Supplemental Performance Data
CW Frequency 100 Hz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 MHz Offset 10 MHz Offset
43.5 GHz
-70
-90
-103
-112
-122
-130
50 GHz
-66
-86
-101
-111
-121
-130
67 GHz
-64
-85
-99
-108
-119
-127
Phase Noise, CW 10 GHz, with Option UNY and without Option UNY
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz
Offset Frequency
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
Phase Noise (dBc/Hz)
Phase Noise, CW 10 GHz (Typical)
CW 10 GHz with Option UNY
CW 10 GHz without Option UNY
Find us at www.keysight.com Page 51
Test Port Input
Table 48. Noise Floor (dBm) @ 10 Hz IFBW, All Options, All Ports
Total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in
dBm.
May typically be degraded at particular frequencies below 500 MHz due to spurious receiver residuals.
Description Specification Typical
10 MHz to 50 MHz
1
-70
-76
50 MHz to 100 MHz
1
-92
-97
100 MHz to 500 MHz
-101
-106
500 MHz to 1 GHz
-110
-115
1 GHz to 10 GHz
-114
-119
10 GHz to 13.5 GHz
-114
-120
13.5 GHz to 24 GHz
-116
-121
24 GHz to 26.5 GHz
-117
-121
26.5 GHz to 35 GHz
-106
-112
35 GHz to 40 GHz
-104
-110
40 GHz to 50 GHz
-101
-108
50 GHz to 60 GHz
-101
-107
60 GHz to 67 GHz
-101
-108
67 GHz to 70 GHz
--
-106
1
With an LFE option installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 49.
Table 49. Test Port Noise Floor (dBm) @ 10 Hz IFBW, All LFE Options (LFE Enabled)
Description Specification Typical
500 Hz to 900 Hz
--
-93
900 Hz to 1 kHz
-90
-96
1 kHz to 10 kHz
-91
-96
10 kHz to 100 kHz
-101
-105
100 kHz to 1 MHz
-107
-110
1 MHz to 5 MHz
-108
-112
5 MHz to 10 MHz
-102
-106
10 MHz to 50 MHz
-102
-106
50 MHz to 100 MHz
1
-102
-106
1
May be degraded at 100 MHz due to spurious receiver residuals.
Find us at www.keysight.com Page 52
Table 50. Direct Receiver Access Input Noise Floor (dBm) @ 10 Hz IFBW
Total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in
dBm.
May typically be degraded at particular frequencies below 500 MHz due to spurious receiver residuals.
Description Specification Typical
Options 201, 205, 219, 220, 401, 405, 419, 420 Options 201, 205, 219, 220, 401, 405, 419, 420
10 MHz to 50 MHz
--
-116
50 MHz to 100 MHz
-104
-124
100 MHz to 500 MHz
-113
-133
500 MHz to 1 GHz
-122
-142
1 GHz to 2 GHz
-126
-133
2 GHz to 10 GHz
-125
-133
10 GHz to 13.5 GHz
-125
-134
13.5 GHz to 24 GHz
-127
-135
24 GHz to 26.5 GHz
-128
-135
26.5 GHz to 30 GHz
-117
-126
30 GHz to 35 GHz
-116
-125
35 GHz to 40 GHz
-114
-123
40 GHz to 45 GHz
-111
-120
45 GHz to 50 GHz
-110
-120
50 GHz to 67 GHz
-109
-118
67 GHz to 70 GHz
--
-116
Table 51. 0.1 dB Receiver Compression at Test Port (dBm), Option 201, 219, 401, 419, and All LFE Options - Typical
Description Test Port Power (dBm)
10 MHz to 100 MHz
1
15
100 MHz to 30 GHz
12
30 GHz to 67 GHz
11
1
With an LFE option installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table Table 52.