N5227B.pdf - 第56页

Find us at www. keysi ght.com Page 56 Table 59 . Reference Level Magnitude, All Models and Options - Specification Description Magnit ude (dB) Phase (°) Range ±500 ±500 Resolution 0.001 0.01 Table 60 . Stability, All Opt…

100%1 / 90
Find us at www.keysight.com Page 55
Table 56. Trace Noise
1
Magnitude (dB rms), All Ports, All LFE Options (LFE Enabled)
Description Specification Typical
100 Hz IFBW 1 kHz IFBW 100 Hz IFBW 1 kHz IFBW 100 kHz IFBW 600 kHz IFBW
500 Hz to 900 Hz
--
--
0.002
--
--
--
900 Hz to 4 kHz
0.004
--
0.001
--
--
--
4 kHz to 300 kHz
--
0.004
--
0.002
--
--
300 kHz to 2 MHz
--
0.004
--
0.001
0.01
--
2 MHz to 100 MHz
--
0.004
--
0.001
0.01
0.025
1
Ratioed measurement, -5 dBm at test port.
Table 57. Trace Noise
1
Phase (deg rms), All Options
Description Specification Typical
1 kHz IFBW
1 kHz IFBW
100 kHz IFBW
600 kHz IFBW
10 MHz to 50 MHz
2
0.400
0.1228
1.205
2.928
50 MHz to 100 MHz
2
0.040
0.0083
0.080
0.196
100 MHz to 500 MHz
0.020
0.0040
0.037
0.097
500 MHz to 1 GHz
0.020
0.0017
0.015
0.037
1 GHz to 26.5 GHz
0.020
0.0075
0.015
0.031
26.5 GHz to 43.5 GHz
0.030
0.0125
0.040
0.091
43.5 GHz to 50 GHz
0.035
0.0149
0.040
0.092
50 GHz to 67 GHz
0.045
0.0200
0.048
0.110
67 GHz to 70 GHz
--
0.0213
0.050
0.119
1
Ratioed measurement, nominal power at test port.
2
With an LFE option installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 58.
Table 58. Trace Noise
1
Phase (deg rms), All Ports, All LFE Options (LFE Enabled)
Description Specification Typical
100 Hz IFBW 1 kHz IFBW 100 Hz IFBW 1 kHz IFBW 100 kHz IFBW 600 kHz IFBW
500 Hz to 900 Hz
--
--
0.012
--
--
--
900 Hz to 4 kHz
0.03
--
0.008
--
--
--
4 kHz to 300 kHz
--
0.03
--
0.014
--
--
300 kHz to 2 MHz
--
0.03
--
0.007
0.064
--
2 MHz to 100 MHz
--
0.03
--
0.007
0.068
0.166
1
Ratioed measurement, -5 dBm at test port.
Find us at www.keysight.com Page 56
Table 59. Reference Level Magnitude, All Models and Options - Specification
Description Magnitude (dB) Phase (°)
Range
±500
±500
Resolution
0.001
0.01
Table 60. Stability, All Options - Typical
Description Magnitude (dB/°C) Phase (°/°C)
10 MHz to 50 MHz
1
0.03
0.400
50 MHz to 3.2 GHz
1
0.01
0.100
3.2 GHz to 20 GHz
0.01
0.200
20 GHz to 32 GHz
0.01
0.300
32 GHz to 35 GHz
0.02
0.400
35 GHz to 50 GHz
0.02
0.400
50 GHz to 67 GHz
0.03
0.600
67 GHz to 70 GHz
0.06
1.200
1
With an LFE option installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 61.
Table 61. Stability
1
, All LFE Options (LFE Enabled) - Typical
Description Magnitude (dB/°C) Phase (°/°C)
500 Hz to 900 Hz
0.010
0.2
900 Hz to 1 kHz
0.010
0.2
1 kHz to 10 kHz
0.010
0.2
10 kHz to 100 kHz
0.010
0.2
100 kHz to 1 MHz
0.010
0.1
1 MHz to 5 MHz
0.010
0.1
5 MHz to 10 MHz
0.010
0.1
10 MHz to 50 MHz
0.010
0.1
50 MHz to 100 MHz
0.020
0.1
1
Stability is defined as a ratio measurement made at the test port.
Table 62. Damage Input Level, All Ports
Description Option 200, 201, 219, 400, 401, 419 All LFE Options
RF, DC
27 dBm, 40 V
20 dBm, 50 V
Find us at www.keysight.com Page 57
Phase Noise Measurement Performance (with S930317B phase noise
measurement application)
1
•
Offset frequency range: 0.1 Hz to 10 MHz
•
Sweep speed (typical): 34 seconds (1 Hz to 10 MHz offset in Normal mode)
Table 63. Absolute Phase Noise Sensitivity (dBc/Hz), in Best mode - Supplemental Performance Data
2
Input Power level: +5 dBm (-5 dBm at 50 GHz)
Phase Noise Offset Frequency
Input Frequency
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
300 kHz
1 MHz
10 MHz
1 GHz
-55
-88
-112
-127
-132
-134
-134
-134
-134
10 GHz
-36
-69
-97
-117
-124
-130
-132
-136
-137
20 GHz
-31
-64
-90
-111
-120
-124
-125
-132
-134
40 GHz
-23
-58
-84
-104
-113
-117
-123
-125
-129
50 GHz
-18
-54
-81
-100
-109
-113
-116
-121
-123
Table 64. Absolute AM Noise Sensitivity (dBc/Hz), in Best mode - Supplemental Performance Data
Input Power level: +5 dBm (-5 dBm at 50 GHz)
AM Noise Offset Frequency
Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz 10 MHz
1 GHz
-96
-104
-110
-119
-128
-132
-132
-135
-137
10 GHz
-97
-104
-110
-118
-128
-134
-135
-138
-139
20 GHz
-96
-104
-112
-116
-125
-132
-129
-136
-136
40 GHz
-93
-102
-109
-114
-123
-127
-130
-130
-132
50 GHz
-91
-96
-105
-114
-119
-122
-117
-125
-122
1 The input frequency in the sensitivity tables in this section is limited to the highest frequency of the PNA model.
2 For embedded-LO frequency converters, the frequency used for the table should be that of the embedded-LO.