N5227B.pdf - 第72页

Find us at www. keysi ght.com Page 72 Description Typical Perfo rmance Display Range Magnitude ±2500 dB (at 500 dB/div) , max Phase ±2500° (at 50 0 degrees/div) , max Polar 10 pUnits, min 10,000 Units, max Display Reso l…

100%1 / 90
Find us at www.keysight.com Page 71
General Information
Table 73. Miscellaneous Information
Description Supplemental Information
System IF Bandwidth Range
1 Hz to 15 MHz, nominal
CPU
For the latest information on CPUs and associated hard drives, visit: PNA Hard Drives
and CPUs (keysight.com)
LXI
CPU version 7.0, 8.0
CPU version 9.0
Class C
LXI 1.5
Extended Functions:
HiSLIP; VSI-11 Discovery and
Identification
Maximum Number of Points
100003
Table 74. Front Panel Information, All Options
Description Typical Performance
RF Connectors
Type
1.85 mm (male), 50 ohm, (nominal)
Center Pin Recession
0.002 in. (characteristic)
USB 2.0 Ports - Primary (4 ports)
Standard
Compatible with USB 2.0
Connector
USB Type-A female
Display
Size
31 cm (12.1 in) diagonal color active matrix LCD; 1280 (horizontal) X 800 (vertical)
resolution
Refresh Rate
Vertical 60 Hz; Horizontal 49.31 kHz
Pixels
Any of the following would cause a display to be considered faulty:
• A complete row or column consists of “stuck” or “dark” pixels.
• More than six “stuck on” pixels (but not more than three green) or more than 0.002%
of the total pixels are within the LCD specifications.
• More than twelve “dark” pixels (but no more than seven of the same color) or more
than 0.004% of the total pixels are within the LCD specifications.
• Two or more consecutive "stuck on" pixels or three or more consecutive "dark" pixel
(but no more than one set of two consecutive dark pixels).
• “Stuck on” pixels or more than two “dark” pixels less than 6.5 mm apart (excluding
consecutive pixels).
Find us at www.keysight.com Page 72
Description Typical Performance
Display Range
Magnitude
±2500 dB (at 500 dB/div), max
Phase
±2500° (at 500 degrees/div), max
Polar
10 pUnits, min
10,000 Units, max
Display Resolution
Magnitude
0.001 dB/div, min
Phase
0.01°/div, min
Marker Resolution
Magnitude
0.001 dB, min
Phase
0.01°, min
Polar
10 pUnit, min
Table 75. Rear Panel Information, All Options
Description Typical Performance
10 MHz Reference In
Connector
BNC, female
Input Frequency
10 MHz ±1 ppm, 100 MHz ±1 ppm
20 MHz ±1 ppm, 80 MHz ±1 ppm
Input Level
10 MHz: -15 dBm to +20 dBm
100 MHz: -10 dBm to +20 dBm
Input Impedance
50 Ω, nom.
10 MHz Reference Out
Connector
BNC, female
Output Frequency
10 MHz ±0.7 ppm, 100 MHz ±0.7 ppm
Signal Type
Sine Wave
Output Level
+10 dBm ±4 dB into 50 Ω
Output Impedance
50 Ω, nominal
Harmonics
<-40 dBc, typical
External IF Inputs
Function
Allows use of external IF signals from remote mixers, bypassing the PNA's first converters
Connectors
SMA (female); A, B, C, D, R (4-port); A, B, R1, R2 (2-port)
Input Frequency
Normal IF path
Narrowband IF path
RF < 53 MHz: IF = 826.446 KHz
RF >= 53 MHz: IF = 7.438 MHz
IF = 10.70 MHz
Input Impedance
50 Ω
RF Damage Level
+23 dBm
DC Damage Level
5.5 VDC
Find us at www.keysight.com Page 73
Description Typical Performance
0.1 dB Compression Point
Normal IF path
Narrowband IF path
-9.0 dBm at 7.438 MHz
-17 dBm at 10.70 MHz
Pulse I/O Connector
15-pin mini D-sub (for pin assignment information, refer to the PNA online help)
Pulse Inputs (IF Gates)
Function
Internal receiver gates used for point-in-pulse and pulse-profile measurements
Input Impedance
1 K Ohm
Minimum Pulse Width, Source Modulators
33 ns
Minimum Pulse Width, Receiver Gates
20 ns
DC Damage Level
5.5 VDC
Drive Voltage
0 V (off), +3.3 V (on), nominal
RF Pulse Modulator Input (Source Modulator)
On/Off Ratio
10 MHz to 3.2 GHz
-64 dB
3.2 GHz to 67 GHz
-80 dB
Pulse Period
Minimum
33 ns
Maximum
70 s
Pulse Outputs
Voltage (TTL)
High: 3.3V to 3.5V
Low: <1V
Impedance
50 Ohm
External Test Set Driver
Function
Used for driving remote mixers
Connections
3.5 mm (female)
RF Output Frequency Range
3.2 GHz to 19 GHz
LO Output Frequency Range
0.01 GHz to 26.5 GHz
Rear Panel LO Power
Upper Limit, Typical (dBm)
Lower Limit, Typical (dBm)
10 MHz to 1.7 GHz
--
--
1.7 GHz to 16 GHz
5
-3
16 GHz to 21 GHz
0
-6
21 GHz to 26.5 GHz
4
-5
Rear Panel RF1 / RF2 Power
Maximum Output Power, Typical (dBm)
3.2 GHz to 5 GHz
+3
5 GHz to 19 GHz
+8
Bias Tee Inputs
Connectors
BNC(f) for ports 1, 2, 3 and 4
Fuse
500 mA, bi-pin style