00193463-01 - 第132页

4 Component handling User Manual SIPLACE S-25 HM 4.2 Technical data for the feeders Software Version SR.503.xx 04/2002 US Edition 132 4.2.4 12/16 mm S feeder 4 Fig. 4.2 - 4 12/16 mm S feeder Item no. 0014109 2-xx Width 3…

100%1 / 226
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.2 Technical data for the feeders
131
4.2.3 3 x 8 mm S feeder for 0201/0402 components
4
Fig. 4.2 - 3 3x8mm S feeder for 0201/0402 components
Article number 00141099-xx
Width 30 mm
Component range 0201, 0402
Tracks per feeder 3
Maximum number of feeders (DCA) 2 x 20
Stock of components for 7” reels approx. 10,000 – 15,000
Reel diameter 7” – 15” (up to 381 mm)
Transport distance (adjustable) 2mm ( 4mm)
Cycle time 60 ms
Power supply 30 V DC
4 Component handling User Manual SIPLACE S-25 HM
4.2 Technical data for the feeders Software Version SR.503.xx 04/2002 US Edition
132
4.2.4 12/16 mm S feeder
4
Fig. 4.2 - 4 12/16 mm S feeder
Item no. 00141092-xx
Width 30 mm
Tracks per feeder 1
Maximum number of feeders 2 x 20
Magazine capacity for 7" reels Approx. 4000
Reel diameter 7" - 15" (up to 381 mm)
Feeding stroke (variable) 4 mm, 8 mm, 12 mm, 16 mm
Cycle time 60 ms ± 5 ms (feeding stroke: 8 mm)
Main power supply 30 VDC
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.2 Technical data for the feeders
133
4.2.5 12 mm S feeder for capacitors based on powdered metal, model C/D
Fig. 4.2 - 5 12 mm S feeder for capacitors based on powdered metal, model C/D
Item no. 00141118-xx
Width 30 mm
Tracks per feeder 1
Maximum number of feeders 2 x 20
Magazine capacity for 7" reels Approx. 4000
Reel diameter 7" - 15" (up to 381 mm)
Maximum tape height 3,6 mm
Feeding stroke (variable) 4mm, 8mm, 12mm, 16mm
Cycle time 60 ms ± 5 ms (feeding stroke: 8 mm)
Vibrator time (waiting time) 100 ms
Main power supply 30 VDC
NOTE: 4
Using this feeder type you can adjust the height of the tape support at the pick-up position. 4
DANGER 4
Use only feeders, labeled as shown above, when fee-
ding capacitors based on metal-powder (e.g. tantalum).4
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis