00193463-01 - 第136页
4 Component handling User Manual SIPLACE S-25 HM 4.2 Technical data for the feeders Software Version SR.503.xx 04/2002 US Edition 136 4.2.8 44 mm S fe eder 4 Fig. 4.2 - 8 44 mm S feeder Item no. 0014109 4-xx Width 60 mm …
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.2 Technical data for the feeders
135
4.2.7 24/32 mm S feeder
4
Fig. 4.2 - 7 24/32 mm S feeder
Item no. 00141093-xx
Width 45 mm
Tracks per feeder 1
Maximum number of feeders 2 x 13
Magazine capacity for 7" reels Approx. 2000
Reel diameter up to 15" (up to 381 mm)
Feeding stroke (variable) 4 to 32 mm (in 4 mm increments)
Cycle time 60 ms ± 5 ms (feeding stroke: 8 mm)
Main power supply 30 VDC
4 Component handling User Manual SIPLACE S-25 HM
4.2 Technical data for the feeders Software Version SR.503.xx 04/2002 US Edition
136
4.2.8 44 mm S feeder
4
Fig. 4.2 - 8 44 mm S feeder
Item no. 00141094-xx
Width 60 mm
Tracks per feeder 1
Maximum number of feeders 2 x 10
Magazine capacity for 7" reels Approx. 2000
Reel diameter up to 15" (up to 381 mm)
Feeding stroke (variable) 4 to 44mm (in 4 mm increments)
Cycle time 60 ms ± 5 ms (feeding stroke: 8 mm)
Main power supply 30 VDC
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.503.xx 04/2002 US Edition 4.2 Technical data for the feeders
137
4.2.9 Linear vibratory feeder, type 3
4
Fig. 4.2 - 9 Linear vibratory feeder, type 3
Item no. 00142031-xx
Width 30 mm
Tracks per feeder 1, 2, 3 or 6
Maximum number of feeders 2 x 20
Magazine capacity Up to 150 per stick steel magazine
depending on the component length
Stick steel magazine data 4.5 mm wide / x 6
9.5 mm wide / x 3
11 mm wide / x 2
15 mm wide / x 2
30 mm wide / x 1
Cycle time Depends on the component
Main power supply 30 VDC