00193463-01 - 第193页

User Manual SIPLAC E S-25 HM 5 Station extensions Software Version SR.503.xx 04/2002 US Edition 5.9 Nozzle changer for the 6-segment Collect&Place head 193 5.9 Nozzle changer for the 6-segme nt Collect&Pl ace hea…

5 Station extensions User Manual SIPLACE S-25 HM

5.8 Fine calibration Software Version SR.503.xx 04/2002 US Edition

192

5.8.6 Displaying and analyzing measured values

The measured values can be displayed graphically on screen and saved to diskette. The following

display options are available:

– Display measured values for each individual placement head.

– Display the measured values for each segment.

– Display measured values for the X or Y direction or angular measurement.

User Manual SIPLACE S-25 HM 5 Station extensions

Software Version SR.503.xx 04/2002 US Edition 5.9 Nozzle changer for the 6-segment Collect&Place head

193

5.9 Nozzle changer for the 6-segment Collect&Place

head

5.9.1 Overview

The placement system is supplied as standard with two Collect&Place heads. As an option, a noz-

zle changer can be installed for each Collect&Place head. This enables the nozzle configuration

to be changed quickly, thus allowing the Collect&Place head to be quickly adapted to the needs

of the placement process. 5

The nozzle changer consists of at least one, and up to five magazines, each with twelve nozzle

garages (see Fig. 5.9 - 1). The magazines are seated on a common support and each magazine

is centered using two parallel pins and fixed in place with a spring hook. 5

Magazines for the 9xx and 8xx nozzle types can be set up. The magazines can be arranged as

required. 5

NOTE:

Please refer to Section 5.1 on page 159 for information on the the nozzle changer for the 12-seg-

ment Collect&Place head. 5

5.9.2 Technical data

Nozzle changer for the 6-segment Collect&Place head

Dimensions (length x width x height) 282 mm x 233 mm x 108 mm

Number of nozzle garages Min. 6 / max. 30

Nozzle types 8xx, 9xx

Time required to open and close the locking plate < 200 ms

Capacity of the reject bin

approx. 50 nozzles from the 9xx type,

approx. 5 nozzles from the 8xx type

Pneumatic circuit Compressed air line 5.3 bar

5 Station extensions User Manual SIPLACE S-25 HM

5.9 Nozzle changer for the 6-segment Collect&Place head Software Version SR.503.xx 04/2002 US Edition

194

Fig. 5.9 - 1 Nozzle changer for the 6-segment Collect&Place head, overview

(1) Nozzle changer base

(2) 9xx nozzle magazine

(3) 8xx nozzle magazine

(4) 8xx nozzle discarding device

(5) 9xx nozzle discarding device

(6) Reject bin for discarded nozzles