00193463-01 - 第201页
User Manual SIPLAC E S-25 HM 5 Station extensions Software Version SR.503.xx 04/2002 US Edition 5.10 Vacuum tooling 201 5.10 V acuu m tooling V acuu m tool ing is an other module tha t is use d to incr ease the place men…
5 Station extensions User Manual SIPLACE S-25 HM
5.9 Nozzle changer for the 6-segment Collect&Place head Software Version SR.503.xx 04/2002 US Edition
200
5.9.7 Position detection
There is a position detection fiducial on every magazine. 5
Fig. 5.9 - 5 Nozzle changer - position detection
(1) Positioning fiducial
(2) Position of the nozzles in the magazine with respect to the positioning fiducial
5
User Manual SIPLACE S-25 HM 5 Station extensions
Software Version SR.503.xx 04/2002 US Edition 5.10 Vacuum tooling
201
5.10 Vacuum tooling
Vacuum tooling is another module that is used to increase the placement accuracy for concave
PCBs. The vacuum surface of this device picks up concave PCBs during processing and aligns
them so they are flat. 5
The vacuum tooling module can be used on both single and dual conveyors, and is fitted to the
lifting tables. 5
Description of the functions 5
The PCB is fed to the processing belt, where it is stopped. The lifting table moves up and the vac-
uum circuit for the vacuum tooling device is opened. The PCB is then held in place by the vacuum
tooling device, which is pressed with a spring action against the PCB by the lifting table. This
causes the suction cups of the tooling device to press against the PCB and hold it firmly in posi-
tion. 5
The vacuum channels are vented after placement. The lifting table is lowered, the PCB is re-
leased, and can then be moved on. 5
5 Station extensions User Manual SIPLACE S-25 HM
5.11 DCA vision module on the 12-segment Collect&Place head Software Version SR.503.xx 04/2002 US Edition
202
5.11 DCA vision module on the 12-segment
Collect&Place head
5
Fig. 5.11 - 1 DCA vision module on the 12-segment Collect&Place head
5
(1) DCA vision module
(2) 12-segment Collect&Place head