00193463-01 - 第65页
User Manual SIPLACE S-25 HM 2 Operational Safety Software Vers ion SR.503.xx 04/2002 US Edition 2.1 Safety instruc tions 65 Item 6 in Fig. 2.1 - 4 on page 62 sho wing th e warning signs o n th e basic machi ne - N AFT A …
2 Operational Safety User Manual SIPLACE S-25 HM
2.1 Safety instructions Software Version SR.503.xx 04/2002 US Edition
64
2
2
2
2
2
2
2
Item 4 in Fig. 2.1 - 4 showing the warning signs on
the basic machine - NAFTA region 2
2
2
2
2
2
2
2
2
2
2
Item 5 in Fig. 2.1 - 4 showing the warning
signs on the basic machine - NAFTA region -
visible when the covers are open 2
Warning
High voltage can cause
severe
injury or death
Service in this area must be performed by
authorized personell only
Switch off main electrical and pneumatic
switches, remove from main power
Operating machinery
can
crush and mutilate limbs
Warning
Sliding covers
can crush or cut
User Manual SIPLACE S-25 HM 2 Operational Safety
Software Version SR.503.xx 04/2002 US Edition 2.1 Safety instructions
65
Item 6 in Fig. 2.1 - 4 on page 62 showing the warning
signs on the basic machine - NAFTA region
Feeder label (enlarged)
DANGER 2
Use only feeders, labeled as shown above, when feeding capacitors based on metal-powder (e.g.
tantalum). 2
2
Use only approved feeders, labeled
as shown below, when feeding
capacitors based on metal-powder
(e.g. tantalum).
Fire Hazard
Can cause death, serious injury
or property damage
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
WARNING
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
2 Operational Safety User Manual SIPLACE S-25 HM
2.1 Safety instructions Software Version SR.503.xx 04/2002 US Edition
66
2.1.7 Safety instructions for the PCB barcode reader (option)
Fig. 2.1 - 5 PCB barcode reader (bottom)
(1) PCB barcode reader (bottom)
(2) ‘Laser radiation…’ label (see Fig. 2.1 - 6)
(3) ‘Caution …’ label (see Fig. 2.1 - 7)
CAUTION 2
The scanning beam of the barcode reader has a radiant power of less than 1 mW. The barcode
reader thus conforms to laser class 2 and, according to EN 60825-1, requires no special safety
devices or protective measures. NEVER look into the laser beam. There is also a safety circuit
that switches off the laser diode if the polygon wheel is stationary or rotating too slowly. 2
2