HS50_advance_level 2 - 第211页
Stud ent Gu ide HS-5 0 Adva nced II 07/2 002 Ed ition 7 X- Axis 53 $ [LVG\ QDPLFV NOTE: All SIT EST fu nctions are explai ned by the use o f gantr y 1 ( TXLSPHQWDQG 7 HVW'HYL FHV – 2 or 4 c hannel s to…
07/2002 Edition Student Guide HS-50 Advanced II
7 X-Axis
52
0HDVXULQJGLJLWDO7UDFN6LJQDOVRIWKH<$[HV&RQQHFWRU;RQ;<'LVWULEXWRU6
.(<
; = y-axis
Pin configuration:
NOTE
For troubleshooting you can use the pin on the head board/distributer board for measurement the
digital track signals.
1. Ground 2. Track A
3. Track A
4. Ground
5. Track B 6. Track B
7. Track N 8. Track N
9. -4V 10.removed
Student Guide HS-50 Advanced II 07/2002 Edition
7 X-Axis
53
$[LVG\QDPLFV
NOTE:
All SITEST functions are explained by the use of gantry 1
(TXLSPHQWDQG7HVW'HYLFHV
– 2 or 4 channel storage oscilloscope.
– SIPLACE axis test box, complete.
–SITEST software.
NOTE
The machine must have reached its operating temperature before you begin to adjust the axes.
Therefore, make sure to switch it on, at least 30 minutes before you begin to work.
6HUYR%RDUGV*DQWU\$[HV+6
T
BS 200 / 10X
T
BS 200 / 15Y
07/2002 Edition Student Guide HS-50 Advanced II
7 X-Axis
54
.(<
TBS 200 / 10X = Servo board x-axis
TBS 200 / 15Y = Servo board y-axis
(1) LED: Ready for operation
(2) LED: Servo enable
(3) LED: I
RMS
limit
(4) LED: Error
MP1 = Nominal current "I-S (U)"
MP2 = Nominal current "I-S (W)"
MP3 = Actual current "I-ist (U)"
MP4 = Actual current "I-ist (W)"
MP5 = "U-nominal (U)"
MP6 = "U-nominal (W)"
MP7 = Free
MP8 = Reference potential "0V"
NOTE
For a proper triggering connect the endsignal and the nominal current.