HS50_advance_level 2 - 第254页
07/2002 Editio n Student G uide HS -50 Advanc ed II 8 Y-Axis 36 $ [LV G\ QD PLFV NOTE: All SIT EST fun ctions a re expl ained by the use of gantr y 1 (TXLSPHQW DQG7 HVW'HYLFH V – 2 or 4 ch annel stora …
Student Guide HS-50 Advanced II 07/2002 Edition
8 Y-Axis
35
0HDVXULQJGLJLWDO7UDFN6LJQDOVRIWKH<$[HV&RQQHFWRU;RQ;<'LVWULEXWRU6
.(<
; = y-axis
Pin configuration:
NOTE
For troubleshooting you can use the pin on the head board/distributer board for measurement the
digital track signals.
1. Ground 2. Track A
3. Track A
4. Ground
5. Track B 6. Track B
7. Track N 8. Track N
9. -4V 10.removed
07/2002 Edition Student Guide HS-50 Advanced II
8 Y-Axis
36
$[LVG\QDPLFV
NOTE:
All SITEST functions are explained by the use of gantry 1
(TXLSPHQWDQG7HVW'HYLFHV
– 2 or 4 channel storage oscilloscope.
– SIPLACE axis test box, complete.
–SITEST software.
NOTE
The machine must have reached its operating temperature before you begin to adjust the axes.
Therefore, make sure to switch it on, at least 30 minutes before you begin to work.
6HUYR%RDUGV*DQWU\$[HV+6
T
BS 200 / 10X
T
BS 200 / 15Y
Student Guide HS-50 Advanced II 07/2002 Edition
8 Y-Axis
37
.(<
TBS 200 / 10X = Servo board x-axis
TBS 200 / 15Y = Servo board y-axis
(1) LED: Ready for operation
(2) LED: Servo enable
(3) LED: I
RMS
limit
(4) LED: Error
MP1 = Nominal current "I-S (U)"
MP2 = Nominal current "I-S (W)"
MP3 = Actual current "I-ist (U)"
MP4 = Actual current "I-ist (W)"
MP5 = "U-nominal (U)"
MP6 = "U-nominal (W)"
MP7 = Free
MP8 = Reference potential "0V"
NOTE
For a proper triggering connect the endsignal and the nominal current.