00197089-02_AI_EA-Verl_X-Serie_S_de_en - 第63页

Installation 3.2.4 Input Conveyor – Conveyor Side D Overview of Conversion (B efore/After) Extension Input/Output Conveyor and Hand Guard Ein-/Ausga beband verlängerung und Eingreifschutz 63 3.2.4 3 . 2 . 4 I n p u t C o…

100%1 / 80
Installation
Overview of Conversion (Before/After) 3.2.3 Input Conveyor – Conveyor Side C
62 Extension Input/Output Conveyor and Hand Guard Ein-/
3.2.3
3.2.3 Input Conveyor – Conveyor Side C
Input Conveyor – Conveyor Side C
A Conveyor side without extension B Conveyor side with extension
1 The idler pulley is converted from (1a) to
(1b).
2 The screw M5x14.7 (TX25) without nut re-
mains.
3 The screw M5x14.7 (TX25) without nut re-
mains.
4 Idler (loosen only)
5 The idler pulley is converted from (5a) to
(5b).
6 Measurement point for belt tension: 85+-
9Hz
Installation
3.2.4 Input Conveyor – Conveyor Side D Overview of Conversion (Before/After)
Extension Input/Output Conveyor and Hand Guard Ein-/Ausgabebandverlängerung und Eingreifschutz 63
3.2.4
3.2.4 Input Conveyor – Conveyor Side D
Input Conveyor – Conveyor Side D
A Conveyor side without extension B Conveyor side with extension
1 The idler pulley is converted from (1a) to
(1b).
2 The screw M5x14.7 (TX25) without nut re-
mains.
3 The screw M5x14.7 (TX25) without nut re-
mains.
4 Idler (loosen only)
5 The idler pulley is converted from (5a) to
(5b).
6 Measurement point for belt tension: 85+-
9Hz
Installation
Overview of Conversion (Before/After) 3.2.5 Output Conveyor – Conveyor Side A
64 Extension Input/Output Conveyor and Hand Guard Ein-/
3.2.5
3.2.5 Output Conveyor – Conveyor Side A
Output Conveyor – Conveyor Side A
A Conveyor side without extension B Conveyor side with extension
1 The idler pulley is converted from (1a) to
(1b).
2 The screw M5x14.7 (TX25) without nut re-
mains.
3 The screw M5x14.7 (TX25) without nut re-
mains.
4 The old idler is no longer required. It is
moved over to the machine center. It must
not touch the new idler (5).
5 This deflection pulley already present takes
on the job of the idler. (No conversion re-
quired, just loosen)
6 Measurement point for belt tension: 85+-
9Hz
7 This nut is removed. The screw itself re-
mains unchanged.