DECAN_S2_Maintenance(Eng_Ver4.3).pdf - 第65页
Mon thly Inspe ction chapt er 5 Advanced Chip Shooter DE CAN S2 M ain ten an ce H and bo ok 5-4 Checking and Cleaning Conveyor Sensor / Fiducial Mark Monthly Inspe ction Step 4 . Clea n the s ens or win dow an d fidu cia…
Monthly Inspection
chapter 5
Advanced Chip Shooter
DECAN S2 Maintenance Handbook
5-3
Checking and Cleaning Conveyor Sensor / Fiducial Mark
Checking and Cleaning Conveyor Sensor / Fiducial
Mark
Tool for Maintenance
Cleaning liquid, clean cloth
Measures
Step 1.
Move the Front X Frame assembly backward as
described in "Backward movement of the front X-frame"
on page 1-4.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 3.
Check the recognition accuracy of the corresponding
photo sensor as shown in the following figure. (The red
LED is turned on when an object is recognized.)
Rear
Front
Option(Conveyor 2-2-2)
Rear
Front
Option(Conveyor single)
Rear
Front
(Time required: 10min / No. M-2)
Monthly Inspection
chapter 5
Advanced Chip Shooter
DECAN S2 Maintenance Handbook
5-4
Checking and Cleaning Conveyor Sensor / Fiducial Mark
Monthly Inspection
Step 4.
Clean the sensor window and fiducial mark with a swab
and an ultra-fine fiber cloth.
①Remove the dust or foreign material on the sensor window using the cotton
swab
②Remove the dust or foreign material on the sensor window using the clean
cloth
Monthly Inspection
chapter 5
Advanced Chip Shooter
DECAN S2 Maintenance Handbook
5-5
Checking and Cleaning Conveyor Sensor / Fiducial Mark
Option (Conveyor 2-2-2)
Fiducial Mark
Option (Conveyor single)
Fiducial Mark