00197963-01_AI_Power_Supply_Conversion_SIPLACE_E_en - 第20页
Conversion Installing the Power Conversion Kit 20 Assembly Instructions SIPLACE E Components of the 208 V power con version kit ► Install the transformer [03107593-xx] (9) as shown in the above figur e. 1 4 x M4x6 screws…
Conversion
Installing the Power Conversion Kit
Assembly Instructions SIPLACE E 19
Remove covers
► Remove the cover in front of the vacuum pump control unit (1).
► Remove the standard cover that hides the installation location of the transformer (2).
1 Cover in front of vacuum pump control unit
removed
2 Standard cover [03112972-xx] in front of in
-
stallation location of the transformer
3 PE frame 4 Vacuum pump control unit
Conversion
Installing the Power Conversion Kit
20 Assembly Instructions SIPLACE E
Components of the 208 V power conversion kit
► Install the transformer [03107593-xx] (9) as shown in the above figure.
1 4 x M4x6 screws [03046903-xx] 2 Transformer cover [03111406-xx]
3 For grounding: 2 x [03012559-xx],
2 x [03047704-xx], 1 x [03008203-xx]
4 2 x M8x12 screws [03042583-xx]
5 2 x washers [03066813-xx] 6 4 x washers [03066810-xx]
7 4 x M4x12 screws [03042553-xx] 8 Bracket [03102898-xx]
9 Transformer [03107593-xx]
Conversion
3.3.1 Installing the Cable Harness Assembly Installing the Power Conversion Kit
Assembly Instructions SIPLACE E 21
3.3.1
3.3.1 Installing the Cable Harness Assembly
Installing the Cable Harness Assembly
Connection points