Zusätzliche Start-Stop Taste HF.pdf - 第28页
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF ser ies Special Design 08/2005 Edition 28 : Open the side p anel over the main distributor . : Remove the hood switch from the cons ole p…
Special Design 2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series
08/2005 Edition
27
: Remove the spacer for the transport retainer by removing the two screws on the reverse.
2
2 screws
Spacer
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series Special Design
08/2005 Edition
28
: Open the side panel over the main distributor.
: Remove the hood switch from the console panel by removing the two screws.
Note the threaded plate inside the console panel.
Disconnect the plug-in connectors for the table release and table docking (X222) and pull them
out carefully.
2
2
2
2
2
2
2
2
2
2
2
2
2
2 screws
Special Design 2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series
08/2005 Edition
29
: Remove the connection for the protective earth wire from the console panel.
2
2
: Remove the left-hand console panel by removing the two screws on the inside.
2
Protective earth
2 screws