Zusätzliche Start-Stop Taste HF.pdf - 第29页
Special Design 2 Retrofit Instructions Special desi gn for additional Start-Stop button SIPLACE HF series 08/2005 Edition 29 : Remove the connection fo r the protective earth wire from the console panel. 2 2 : Remove the…
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series Special Design
08/2005 Edition
28
: Open the side panel over the main distributor.
: Remove the hood switch from the console panel by removing the two screws.
Note the threaded plate inside the console panel.
Disconnect the plug-in connectors for the table release and table docking (X222) and pull them
out carefully.
2
2
2
2
2
2
2
2
2
2
2
2
2
2 screws
Special Design 2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series
08/2005 Edition
29
: Remove the connection for the protective earth wire from the console panel.
2
2
: Remove the left-hand console panel by removing the two screws on the inside.
2
Protective earth
2 screws
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series Special Design
08/2005 Edition
30
: Fit the spacer for the transport retainer, the spring-mounted lateral thrust pad and one mount-
ing foot (may be pre-assembled) to the new console panel.
2
2
2
2
2
2
2
2
2
2
2
Spring-mounted
lateral thrust pad
Spacer for
transport retainer
Mounting foot