Zusätzliche Start-Stop Taste HF.pdf - 第32页
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF ser ies Special Design 08/2005 Edition 32 : T ighten the scr ews on the left- han d console p anel as described above. Remember to fit th…
Special Design 2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series
08/2005 Edition
31
: Fit the spring-mounted lateral thrust pad and one mounting foot to the right-hand console
panel.
2
2
2
2
2
2
2
2
2
2
2
2
2
Mounting foot
Spring-mounted
lateral thrust pad
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series Special Design
08/2005 Edition
32
: Tighten the screws on the left-hand console panel as described above.
Remember to fit the hood at the same time, since you will not be able to install it later.
: Run the cables for the left-hand console panel through the opening in the vicinity of the main
distributors.
2
2
: Fix the protective earth wire to the console panel once more.
2
2
2
2
Hole for cables
Special Design 2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series
08/2005 Edition
33
: Plug the individual wires into the Mate-N-Lok connector.
The assignment numbers can be found on the top of the connector.
2
2
2
2
2
2
2
2
2
2
2
Pin 1 white / dark brown Pin 6 yellow
Pin 2 orange Pin 7 unassigned
Pin 3 red Pin 8 unassigned
Pin 4 light brown Pin 9 black
Pin 5 light green