Zusätzliche Start-Stop Taste HF.pdf - 第35页
Special Design 2 Retrofit Instructions Special desi gn for additional Start-Stop button SIPLACE HF series 08/2005 Edition 35 : Fit the actuator for the safety switch on the co ver . 2 2 2 2 2 2 W asher s and nut s 2 scre…
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series Special Design
08/2005 Edition
34
: Connect connector X62 to X62 and X222 to X222.
2
2
: Refit the hood switch on the inside of the console panel and adjust the Schmersal switch to
allow the hood to close easily.
: Fit the transport retainer.
: Tighten the screws on the hand guard.
2
2
2
2
2
2
2
2
2
Connector X62
Connector X222
Special Design 2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series
08/2005 Edition
35
: Fit the actuator for the safety switch on the cover.
2
2
2
2
2
2
Washers and nuts
2 screws
2 Retrofit Instructions Special design for additional Start-Stop button SIPLACE HF series Special Design
08/2005 Edition
36
: Test the opening and closing of the hood.
: Install on the input belt as well.
: Refit all removed side panels.
: Switch the placement machine on at the main switch.
: Test all the safety equipment, including the signaling and fault loops, to ensure that they are
working correctly. Also test the table release and the table retractor.
2
2
2