00198481-01_Technical_Training_E_by_DEK_EN - 第17页
3 Setting up the Machine Technical Training E by DEK 12/2017 17 3 Setting up the Machine There are 3 main factors to consider when setting up the machine: ● Minor Relocation - Moving the machine to another area within …
2 Basic Machine Overview
Room for Your Sketches and Notes
16 Technical Training E by DEK 12/2017
3 Setting up the Machine
Technical Training E by DEK 12/2017 17
3 Setting up the Machine
There are 3 main factors to consider when setting up the machine:
●
Minor Relocation - Moving the machine to another area within the factory
●
Major Relocation - Moving the machine to another factory or storage
●
Power Up - Must be performed after Minor or Major Relocation
Preparation
1. With power applied to the machine, home the stencil actuators.
2. Switch OFF and disconnect the electrical power.
3. Disconnect the pneumatic supply.
4. Remove/open the rear print head cover.
Please refer to the Reference Manual for details on the correct procedure when moving / setting up
the machine.
3 Setting up the Machine
Room for Your Sketches and Notes
18 Technical Training E by DEK 12/2017
Room for Your Sketches and Notes