00198481-01_Technical_Training_E_by_DEK_EN - 第27页
4 Conveyor System 4.6 Analysis Common Error List Technical Training E by DEK 12/2017 27 4.6 Analysis Common Error List Fig.1: Diagnose Transport Rail Fig.2: Diagnose Rising Table
4 Conveyor System
4.5 Rising Table
26 Technical Training E by DEK 12/2017
4.5.3 Electrical Overview
4.5.4 Parts Exchange / Settings / Calibrations
Conveyor Parts Exchange Tools / Setting Calibration
Rising Table Motor Belt Tension 6kg
●
Table reference vision height and table
reference print height
●
Check only as it is unlikely they would
have changed as the sensor/vane have
not been touched.
Belt Belt Tension 6kg
●
Table reference vision height and table
reference print height
●
Check only as it is unlikely they would
have changed as the sensor/vane have
not been touched.
Home Sensor
●
Check / adjust home setting
●
Check / adjust vision height
●
Check / adjust print height
For detailed instructions refer to the technical reference manual.
4 Conveyor System
4.6 Analysis Common Error List
Technical Training E by DEK 12/2017 27
4.6 Analysis Common Error List
Fig.1: Diagnose Transport Rail
Fig.2: Diagnose Rising Table
4 Conveyor System
4.7 Maintenance
28 Technical Training E by DEK 12/2017
Problems Solution
Board remains jammed (time overflow)
●
Check the board width in the product
●
Check belt support after running in
●
Check parallelism of the rails
Board / belt jumps from the rail
●
Belt testing (stretching)
●
Check belt speeds
●
Check pulleys
●
Distance belt support (0.3-0.35mm check)
4.7 Maintenance
Maintenance tasks (For detailed instructions refer to the technical reference manual).
Maintenance content Interval Requirement
Ensure table surface is free from contamination daily IPA Wipes
Ensure vane does not foul the sensor 6 monthly -
Check belt condition 6 monthly -
Ensure all cabling is free and not trapped by table movement 6 monthly -