晶圆测试说明书Cascade-11861-6-Manual.pdf - 第17页
Declaration of Conformity • xv Declaration of Conformity Manufacturer Cascade Microtech, Inc. 2430 NW 206 th Avenue Beaverton, OR 97006 USA Product: Summit 11000/12000-Series Prober Serial No.: _________ ________________…
xiv
•
Summit 11K/12K Probe Station User’s Guide
VORSICHT – UV-Strahlung bei
offenem Glasfaserkabel – fuer
Servicearbeiten Versorgungs-
Spannung abschalten
Attention - Risque de présence
de rayons ultra-violet - Eviter une
exposition quand la fibre
optique est débranchée.
Déconnecter l'alimentation
générale avant toute
intervention de maintenance.
Caution - Ultraviolet Radiation
Hazard - Avoid exposure when
fiber optic cable is not
connected. Remove Power
when servicing.
VORSICHT – Brandgefahr –
Sicherung nur mit passendem
Typ T0.4A 250V ersetzen
Attention - Risque d'Incendie -
Risque de dommages
importants par le feu, risque de
brûlures - Remplace le fusible
par un autre du même gabarit,
T0.4A 250 V.
Caution - Fire Hazard - Can
Cause Serious Fire Damage Or
Burns - Replace Fuse With Same
Type Or Rating T0.4A 250 V
Declaration of Conformity
•
xv
Declaration of Conformity
Manufacturer
Cascade Microtech, Inc.
2430 NW 206
th
Avenue
Beaverton, OR 97006 USA
Product: Summit 11000/12000-Series Prober
Serial No.: __________________________
Date of Shipment: ___________________
Standards
This product has been assessed against the Machinery Directive
1
(89/392/EEC),
annex1 (as amended) and complies with the Essential Health and Safety
Requirements therein. This product has also been assessed against the Low
Voltage Directive (93/68/EEC) and EN61010 and complies with the safety
requirements for electrical equipment for measurement control and laboratory
use.
This product has been assessed against the EMC Directive (89/336/EEC) and
complies with EN55011 (CISPR 11, Class A), radiated and conducted emissions,
and with immunity standard EN50082-1.
This Declaration of Conformity is based on the results of analysis, testing, and
evaluation performed by Cascade Microtech, Inc. and with the assistance of a
body notified to the Member States and Commission of the European
Communities.
Signature: _______________________________
Date: ___________________________________
Position: ________________________________
1. As permitted by 93/465/EEC, ‘Council Decision concerning the modules for the
various phases of the conformity assessment procedures and the rules for the affix-
ing and use of the CE conformity marking, which are intended to be used in the
technical harmonization directives’ dated 22 July 1993, “Where one or more of
these directives allow the manufacturer, during a transitional period, to choose
which arrangements to apply, the CE marking indicates conformity to the provi-
sions only of those directives applied by the manufacturer.”
xvi
• Summit 11K/12K Probe Station User’s Guide