5OM-1343-008_w - 第22页

Safe-1 1 AKFE-ID Safety Precautions Alert Indications described as " W A RN IN G " (continued) Alert Description Related Items Pay close attention to the cutter blade during the maintenance work. • Lack of atte…

100%1 / 219
Safety Precautions
Safe-10
AKFE-ID
0601-002
Alert Indications described as "
WARNING
"
Alert Description Related Items
Be sure to keep the all covers (door type) closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in
"Chapter 1 (Vol. 1)"
Before performing maintenance work, shut off the power breaker
and lock the power breaker with the padlock.
"2.3.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"2.4.4" in
"Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being connected.
"2.4.8" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"1.2.2" in
"Chapter 2 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
work carefully for the machine in compliance with the specied
instructions.
"1.1" in
"Chapter 1 (Vol. 4)"
Before maintenance work, shut off the power breaker and lock it
with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol. 4)"
Safe-11
AKFE-ID
Safety Precautions
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
•
Be sure to attach the xing jig to the cut unit during the
maintenance work for safety purposes.
"3.3.6", "4.3" and
"4.4" in "Chapter 1
(Vol. 4)"
0601-002
Safety Precautions
Safe-12
AKFE-ID
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and nger injuries.
•
Becareful
toavoidhandandngerinjurieswhenclosingthecovers
(door type).
•
Holdthehandgriprmlyandopenorclosethecover(doortype)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
WhenthegreenlampofthelighttowerisONorickering(ONand
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Before performing any work, conrm that the "LOCK" lamp on
the operation panel is "ON" (green).
•
If the "LOCK" lamp is not turned on, the machine can
be operated at any time from both front and rear sides,
endangering the operators around the machine.
•
Before performing any setup work, etc., with the machine
powered, be sure to press the [PNL CHANGE] button on either
the front or the rear operation panel and conrm that the [LOCK]
lamp is turned "ON".
"2.3.4" in
"Chapter 1 (Vol. 1)"
Be sure not to detach the transparent cover located above the
conveyor.
Otherwise, part of your clothes or hair might get caught by
the conveyor, causing an injury.
"2.4.2" in
"Chapter 1 (Vol. 1)"
When a PCB is trapped in the PCB receiving area between the
main machine and the input or the output machine, be sure to
stop the machine before removing the PCB.
Dependingonhowtheoutputsystemsarespeciedfortheinputand
output machines, the related conveyor may start running in the Y
direction for PCB Y-position arrangement at the moment when the
trappedPCBisremoved,causingyournger(s)togetcaughtinthe
conveyor.
"2.4.2" in
"Chapter 1 (Vol. 1)"
0607-003