5OM-1343-008_w - 第23页

Safety Precautions Safe-12 AKFE-ID Alert Indications described as " CAUTION " Alert Description Related Items Avoid hand and nger injuries. •  Becareful toavoidhandandngerinjurieswhenclosingthecov…

100%1 / 219
Safe-11
AKFE-ID
Safety Precautions
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
•
Be sure to attach the xing jig to the cut unit during the
maintenance work for safety purposes.
"3.3.6", "4.3" and
"4.4" in "Chapter 1
(Vol. 4)"
0601-002
Safety Precautions
Safe-12
AKFE-ID
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and nger injuries.
•
Becareful
toavoidhandandngerinjurieswhenclosingthecovers
(door type).
•
Holdthehandgriprmlyandopenorclosethecover(doortype)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
WhenthegreenlampofthelighttowerisONorickering(ONand
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Before performing any work, conrm that the "LOCK" lamp on
the operation panel is "ON" (green).
•
If the "LOCK" lamp is not turned on, the machine can
be operated at any time from both front and rear sides,
endangering the operators around the machine.
•
Before performing any setup work, etc., with the machine
powered, be sure to press the [PNL CHANGE] button on either
the front or the rear operation panel and conrm that the [LOCK]
lamp is turned "ON".
"2.3.4" in
"Chapter 1 (Vol. 1)"
Be sure not to detach the transparent cover located above the
conveyor.
Otherwise, part of your clothes or hair might get caught by
the conveyor, causing an injury.
"2.4.2" in
"Chapter 1 (Vol. 1)"
When a PCB is trapped in the PCB receiving area between the
main machine and the input or the output machine, be sure to
stop the machine before removing the PCB.
Dependingonhowtheoutputsystemsarespeciedfortheinputand
output machines, the related conveyor may start running in the Y
direction for PCB Y-position arrangement at the moment when the
trappedPCBisremoved,causingyournger(s)togetcaughtinthe
conveyor.
"2.4.2" in
"Chapter 1 (Vol. 1)"
0607-003
Safe-13
AKFE-ID
Safety Precautions
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Related Items
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"2.4.4" in
"Chapter 1 (Vol. 1)"
When a tape feeder is attached or detached, be sure not to
drop it.
Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.1" in
"Chapter 2 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Hazardous to your hands and ngers!
Be sure to hold the handle to move the bank feeder change cart.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Watch your step!
·
Be careful not to hit your foot against the cart while moving the bank
feeder change cart.
Especially
, the resistance against cart movement may change rapidly
whenthe
oorisraggedandthecartgetscaughtontheooror
a sheet is used and the cart gets caught at the edge or a slackened
portion of the sheet.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Do not put your hand in the moving area while the feeder base is
moving up or down.
WhiletheLEDofa[FEEDERREADY]switchisbeingickering,it
indicates that the corresponding feeder base is moving up and down.
"2.4.8" in
"Chapter 1 (Vol. 1)"
0607-004