5OM-1343-008_w - 第4页
1 AKFE-ID Before Use W e are grateful to you for purchasing Hitachi direct-drive modular mounter (chip mounter). This machine can be used to place the chip-type electronic components on PCBs. This instruction manual desc…
Before using this manual, please note the following items.
1. The contents of this manual are subject to change for improvement
without prior notice. Please pay attention to the latest information such as
the CS news that will be provided or issued by our company.
2. The copyright of the instruction manual belongs to Hitachi High-Tech
Instruments Co., Ltd.
This manual shall not in any shape or form, in whole or part, be
reproduced, copied or disclosed to any third party without the written
content of the publisher.
3. Our company shall not be held to any liability for any damages suffered
or incurred by the end user
, arising from any operations other than those
(in
cluding the purposes and methods) described in this instruction manual.
Be sure to handle the machine carefully.
4. This instruction manual neither guarantees any license to industrial
property rights, etc., nor grants any license of such rights.
0909-003
AKFEPED-ID
1
AKFE-ID
Before Use
We are grateful to you for purchasing Hitachi direct-drive modular mounter (chip
mounter).
This machine can be used to place the chip-type electronic components on PCBs.
This instruction manual describes the functions, handling, and operations of the machine
for those who have fi nished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
0601-002
2
AKFE-ID
About the Instruction Manual
This instruction manual is divided into the following six volumes (booklets) on subjective
basis.
Volume 1: Guide
This describes the basic usage of the machine and is prepared for those
who will read this manual for the fi rst time or have never used any
direct-drive modular mounter.
[Coverage]
"Checking Items", "Safety Precautions", "Guide Map for Machine and
Operations", "Functions", Preparatory and Ending Procedures of Automatic
Operation", "Countermeasures against Simple Problems", "Specifi cations", and
"Glossary"
Volume 2: Operation
This describes the general items related to machine operations for those who have
read "Volume 1: Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Automatic Operation", "Program/
Product Change Operations", "Operation Check", "Device Management",
"Maintenance/Adjustment", etc.
Volume 3: Programming and Machine Data
This describes various data required to be understood by the programmer (a person
who creates pattern programs) and the supervisor (a person authenticated as a
supervisor).
[Coverage]
"Checking Items", "Safety Precautions", "Pattern Programs", "Component
Library Data", "Management Data", "Nozzle Data", "System Setup Data", etc.
Volume 4: Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the machine
operators.
[Coverage]
"Checking Items", "Safety Precautions", "Periodic Maintenance", "List of
Consumables and Servicing Parts", "Remedial Measures after "ERROR"
Window", etc.
0601-002