5OM-1343-008_w - 第40页

Safe-29 AKFE-ID Safety Precautions No. Alert Labels and Description (16) Description l The inside of the recognition light source unit becomes h igh in temperature. Bef ore replacing the lamp with a new one, set the p ow…

100%1 / 219
Safety Precautions
Safe-28
AKFE-ID
No. Alert Labels and Description
(14)
Description
l
Thegrounding
line(PE)mustbeconnectedrsttotheleading-insectionofthe
primary power supply.
Imperfect grounding will cause an electric shock.
(15)
(15-1)
(15-2)
(15-3)
Description
l
This label indicates that high voltage is applied to the area.
Residual voltages may remain behind for a few minutes
in the internal devices of
the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply
andtheservoampliergo"OFF" in 10 minutes or more after the power
breaker is set to "OFF".
0604-003
Safe-29
AKFE-ID
Safety Precautions
No. Alert Labels and Description
(16)
Description
l
The inside of the recognition light source unit becomes high in temperature.
Bef
ore replacing the lamp with a new one, set the power breaker to "OFF" and leave
theunitintactuntilitcoolsdownsufciently.
(20)
Description
l
Before operating the machine, please read the instruction manual carefully for
correct operations.
An operator’s error will break down the machine, causing an injury or a serious
accident.
(21)
Description
l
Do not step on the machine.
The machine may be damaged, causing you to fall down from the machine and get
injured.
0604-003
Safety Precautions
Safe-30
AKFE-ID
No. Alert Labels and Description
(22)
Description
l
Be sure to attach or detach the feeder carefully with both hands. Otherwise, the
feeder may fall down and break. You may also be given an injury
.
(23)
Description
l
Onlythepersonwh
ohasnishedoperatortrainingintheoperationandmaintenance
of the machine should touch the machine. Otherwise, the machine will be break
down.
(24)
Description
l
While the machine is running, be sure not to disconnect any connector.
Be sure to attach or detach the feeder base connector after the feeder base has
descended and stopped completely.
0604-003