5OM-1343-008_w - 第6页
3 AKFE-ID V olume 5: Pneumatic and Machine Diagrams This provides various kinds of material such as pneumatic and electrical circuit diagrams, etc. [Coverage] "Checking Items", "Safety Precautions", &…
2
AKFE-ID
About the Instruction Manual
This instruction manual is divided into the following six volumes (booklets) on subjective
basis.
Volume 1: Guide
This describes the basic usage of the machine and is prepared for those
who will read this manual for the fi rst time or have never used any
direct-drive modular mounter.
[Coverage]
"Checking Items", "Safety Precautions", "Guide Map for Machine and
Operations", "Functions", Preparatory and Ending Procedures of Automatic
Operation", "Countermeasures against Simple Problems", "Specifi cations", and
"Glossary"
Volume 2: Operation
This describes the general items related to machine operations for those who have
read "Volume 1: Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Automatic Operation", "Program/
Product Change Operations", "Operation Check", "Device Management",
"Maintenance/Adjustment", etc.
Volume 3: Programming and Machine Data
This describes various data required to be understood by the programmer (a person
who creates pattern programs) and the supervisor (a person authenticated as a
supervisor).
[Coverage]
"Checking Items", "Safety Precautions", "Pattern Programs", "Component
Library Data", "Management Data", "Nozzle Data", "System Setup Data", etc.
Volume 4: Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the machine
operators.
[Coverage]
"Checking Items", "Safety Precautions", "Periodic Maintenance", "List of
Consumables and Servicing Parts", "Remedial Measures after "ERROR"
Window", etc.
0601-002
3
AKFE-ID
Volume 5: Pneumatic and Machine Diagrams
This provides various kinds of material such as pneumatic and electrical circuit
diagrams, etc.
[Coverage]
"Checking Items", "Safety Precautions", "Pneumatic Diagrams", "Parts
Location", "Electrical Circuit Diagrams", etc.
Component Library
This includes an explanation of component library data and how to create it.
First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"
(first part of this manual).
Identifying Icons in Manual
Notice
This icon shows an important precautionary or a regulatory item.
Note
This icon shows the descriptions for correct operations of the machine.
Reference
This icon shows the items to be referred to.
Procedure
This icon shows the operation procedures.
Refer to the glossary (Vol. 1) for the definitions of basic words (X/Y Beam Section, Cover
Section, etc.) used in this manual.
0611-003
4
AKFE-ID
0601-002