Apollo1_Operators_Manuel - 第8页
8 cab - Produkttechnik GmbH / Tharo Systems, Inc. T rademarks Centronics ® is a registered trademark of Centronics Data Computer Corporation. Macintosh- Computer is a product of Apple Computer, Inc. Microsoft ® is a regi…
7cab - Produkttechnik GmbH / Tharo Systems, Inc.
A General Guide to the Documentation
Operating Manual
The present manual contains information on the characteristics, features,
functions, and use of the printers of the Apollo line.
In particular, the Apollo line includes the following models :
- Apollo 1
- Apollo 2 (with or without internal rewinder)
- Apollo 3 (with or without internal rewinder)
The first few chapters of this manual cover general information which is necessary
for unpacking and operating the printer as well as information about accessibility to
different components of the printer and on optional accessories.
In the next chapters, the loading of media and ribbon, the self test of the printer,
and the configuration in setup will be explained.
In the appendices, you will find useful additional information, such as internal
character sets of the printer, and cabling specifications. Furthermore, comments
on possible error messages and printer maintenance are included.
Note the directions for use on recommended material and comments on
maintenance in order to avoid damage and premature failure of your Apollo.
Every effort has been made in the creation of this manual to provide as much
information as possible in an understandable manner.
We welcome your comments and suggestions regarding additions or corrections to
improve future editions of this manual. Please, let us know if you have any
questions.
Further Documentation
Further information on the programming of the Apollo with its own set of
commands can be found in the "Programming Instructions - Apollo".
Detailed information about service and maintenance are included in the "Service
Manuals" of the Apollo 1, Apollo 2 and Apollo 3. (e.g. replacement of
components, adjustment instructions, circuit diagrams, spare parts lists, etc.)
F
8 cab - Produkttechnik GmbH / Tharo Systems, Inc.
Trademarks
Centronics ® is a registered trademark of Centronics Data Computer Corporation.
Macintosh-Computer is a product of Apple Computer, Inc.
Microsoft ® is a registered trademark of Microsoft Corporation.
Bitstream ® is a registered trademark of Bitstream, Inc.
Speedo is a registered trademark of Bitstream, Inc.
TrueType is a registered trademark of Apple Computer, Inc.
Easylabel ® is a registered trademark of Tharo Systems, Inc.
9cab - Produkttechnik GmbH / Tharo Systems, Inc.
Characteristics of the Thermal Printhead
Dear Customer,
The thermal printhead is the most sensitive part of your printer.
Pay special attention to the following guidelines :
1) The glass cover on the printhead must not be touched with the hand. Do
not use any sharp items, such as knives or screwdrivers, to clean the
printhead.
2) During printing, always take care that there is no dirt or foreign objects
on the labels in order to avoid impurification of the printhead. This way,
the printhead might be damaged.
3) Use proper label material with a smooth surface only.
A rough surface will affect the printhead and may cause damage and
reduce its operating life.
4) Clean the printhead regularly with a special printhead cleaning pen, or
an isopropyl alcohol soaked cotton swab.
5) Print with the lowest possible printhead temperature.
Careful use will allow you to print approximately between 18 to 30 miles
(30 to 50 km) of print media before the printhead needs replacing.
Improper usage can cause damage to the printhead.
Please note :
No manufacturer provides a warranty on the printhead, since improper
usage can hardly be proved after failure, but will affect the operating life
and durability of the printhead.
F