YG200_200L_E - 第40页

1-12 1 Part names and functions 4 . 1 . 2 F e e d e r e x c h a n g e c a r r i a g e T h e f e e d e r e x c h a n g e c a r r i a g e a l l o w s f e e d e r s e t u p i n a d v a n c e f o r t h e n e x t p r o d u c …

100%1 / 101
1-11
1
Part names and functions
n
Feeder plate layout
Type Layout
Set No.
Head
No.
A B C D
YG200
1
20
21
40
140
121
120
101
A B
CD
1 1 to 20 26 to 40
101 to 120 126 to 140
2 1 to 19 25 to 40
101
to
119
125 to 140
3 1 to 18 24 to 40
101 to 118 124 to 140
4 1 to 17 23 to 40
101 to 117 123 to 140
5 1 to 16 22 to 40
101 to 116 122 to 140
6 1 to 15 21 to 40
101 to 115 121 to 140
YG200L
1
24
25
48
148
125
124
101
A B
CD
1 1 to 24 28 to 48
101 to 124 128 to 148
2 1 to 24 27 to 48
101 to 124 127 to 148
3 1 to 24 26 to 48
101 to 124 126 to 148
4 1 to 23 25 to 48
101 to 123 125 to 148
5 1 to 22 25 to 48
101 to 122 125 to 148
6 1 to 21 25 to 48
101 to 121 125 to 148
1-12
1
Part names and functions
4.1.2 Feeder exchange carriage
The feeder exchange carriage allows feeder setup in advance for the next production boards. The feeders on
the feeder exchange carriage can be changed at one time.
n
Feeder exchange carriage
Feeder exchange carriage
1
2
5
4
6
3
23111-M2-00
1 Handle
Use this handle to move and position the feeder exchange carriage.
2 Feeder plate
Up to 20 or 24 tape feeders (8mm tape feeders) can be installed on this feeder plate.
3 Vertical clamp bolts
If necessary to adjust the feeder plate height, loosen these bolts and change their clamping positions by turning the
height adjustment bolt 6 to match the mounter height.
4 Empty tape dump box (option)
This box is for catching empty tape after components have been picked up.
5 Empty tape dump box holder
This holder prevents the tape dump box (option) from falling.
6 Height adjustment bolt
After loosening the vertical clamp bolts 3, turn this bolt to adjust the feeder plate height to match the mounter height.
1-13
1
Part names and functions
n
Mounter side
Switch and sensors on the mounter
3
1
2
4
23112-M2-00
1 Clamp ON/OFF switch
After installing the feeder exchange carriage into the mounter, turn this switch to the left (ON) to raise the feeder plate of
the feeder exchange carriage and automatically clamp it into the position. To unclamp, turn this switch to the right (OFF).
2 Forward end sensor
When the feeder exchange carriage is fully installed into the mounter, the green LED on this sensor lights up.
3 Area sensor for non-stop operation (option)
This safety area sensor is attached to mounters with a non-stop function. When the feeder exchange carriage is installed
into the mounter, the entrance sensors located at the front (or rear) of the mounter detect the feeder exchange carriage
and turn off this area sensor function.
4 Entrance sensor for non-stop feeder exchange carriage (option)
This sensor is attached to the front (or rear) of mounters with a non-stop function. When the feeder exchange carriage is
installed into the mounter, this sensor detects the feeder exchange carriage and turns off the area sensor function to
permit removing and installing the feeder exchange carriage even during automatic operation.